Introduction to Catalytic reduction low-temperature flue gas denitrification equipment, SCR denitration system specifications, model parameters

Catalytic reduction low-temperature flue gas denitrification equipmentit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，the product looks atmospheric.，The structural design is more advanced and reasonable.，Structure consists of Catalyst supply system, Catalyst reactor, control system, Temperature control and monitoring system, Flue gas mixing and distribution system and so on，is an advanced Catalytic reduction low-temperature flue gas denitrification equipment developed by our company in combination with the actual situation of the industry。

1、Brief introduction of Catalytic reduction low-temperature flue gas denitrification equipment

Catalytic reduction low-temperature flue gas denitrification equipmentdelective catalytic reduction technology is an efficient flue gas denitrification technology.，usually used in coal-fired power station, cement plant, iron and steel plant, building materials, Gas power plant and other fields，the advantage is The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Catalytic reduction low-temperature flue gas denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Catalytic reduction low-temperature flue gas denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Catalytic reduction low-temperature flue gas denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Catalytic reduction low-temperature flue gas denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Catalytic reduction low-temperature flue gas denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.。

Catalytic reduction low-temperature flue gas denitrification equipment

2、Catalytic reduction low-temperature flue gas denitrification equipment use

Catalytic reduction low-temperature flue gas denitrification equipmentWidely used in environmental protection, Flue gas denitrification, environmental protection, Meet the requirements of environmental protection and Promote sustainable development，it has the functions of environmental protection, Improve energy efficiency, Improve working conditions, environmental protection and Improve working conditions，support customization。

Catalytic reduction low-temperature flue gas denitrification equipment

3、Catalytic reduction low-temperature flue gas denitrification equipment video detail

You can buy Catalytic reduction low-temperature flue gas denitrification equipment according to your needs and show you Catalytic reduction low-temperature flue gas denitrification equipment videos.。

Catalytic reduction low-temperature flue gas denitrification equipment

As you can see from the live video.，One-combustion energy saving is a popular Catalytic reduction low-temperature flue gas denitrification equipment。

4、Catalytic reduction low-temperature flue gas denitrification equipment advantage

The advantages of Catalytic reduction low-temperature flue gas denitrification equipment are as follows:

1. Wide applicability

Catalytic reduction low-temperature flue gas denitrification equipment technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Catalytic reduction low-temperature flue gas denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.

2. Diversity and high efficiency of catalysts

There are many kinds of catalysts used in the Catalytic reduction low-temperature flue gas denitrification equipment technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at low temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Catalytic reduction low-temperature flue gas denitrification equipment technology to maintain high efficiency of denitration in a wider temperature range and more complex flue gas conditions.

3. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Catalytic reduction low-temperature flue gas denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Catalytic reduction low-temperature flue gas denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

4. Intelligent control and convenience of operation

The Catalytic reduction low-temperature flue gas denitrification equipment has gradually realized intelligent control. By integrating advanced control system and sensor technology, the Catalytic reduction low-temperature flue gas denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

5. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Catalytic reduction low-temperature flue gas denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Catalytic reduction low-temperature flue gas denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

Catalytic reduction low-temperature flue gas denitrification equipment

5、Catalytic reduction low-temperature flue gas denitrification equipment price concessions

The Catalytic reduction low-temperature flue gas denitrification equipment price is introduced as follows:

1. Product configuration difference

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Catalytic reduction low-temperature flue gas denitrification equipment are closely related. One-combustion energy saving has comprehensively measured the configuration and sales price of products when designing Catalytic reduction low-temperature flue gas denitrification equipment, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

2. geographical position

The price of Catalytic reduction low-temperature flue gas denitrification equipment in Shandong(Province) is much lower than that in other regions, and One-combustion energy saving is a specialized manufacturer of Catalytic reduction low-temperature flue gas denitrification equipment not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Catalytic reduction low-temperature flue gas denitrification equipment price positioning more reasonable, low-cost and economical.

3. Product technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

4. Less intermediate links

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

5. Model specification

Because the specifications and models of products are different, their specifications and configurations are not the same. As we all know, the cost of products with high configuration will be higher, and vice versa, because there is a close relationship between product sales price and specifications and models.

Catalytic reduction low-temperature flue gas denitrification equipment

6、One-combustion energy saving's strength

The company has many years of Catalytic reduction low-temperature flue gas denitrification equipment manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Catalytic reduction low-temperature flue gas denitrification equipmentit is mainly composed of control system, Catalyst reactor, Temperature control and monitoring system, Catalyst supply system and Flue gas mixing and distribution system，This productThe overall structural design is relatively simple，it is widely used inGas power plant,cement plant,iron and steel plant,metallurgy,building materials and other industries。