What is a Step furnace flue gas denitrification equipment? How much is the price of the SCR flue gas denitrification?

Step furnace flue gas denitrification equipmentis an efficient, stable and environment-friendly flue gas denitrification technology.，The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Step furnace flue gas denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Step furnace flue gas denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Step furnace flue gas denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Step furnace flue gas denitrification equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Step furnace flue gas denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Step furnace flue gas denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.，Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，it is mainly composed of Catalyst supply system, Temperature control and monitoring system, Catalyst reactor, Flue gas mixing and distribution system and control system，productThe overall structural design is simple and novel.，it is widely used in iron and steel plant, metallurgy, Gas power plant, cement plant and building materials。The following is to introduce the Step furnace flue gas denitrification equipment:

1、Brief introduction of Step furnace flue gas denitrification equipment

Step furnace flue gas denitrification equipmentis an efficient, stable and environment-friendly flue gas denitrification technology.，is a kind of high quality and low price Step furnace flue gas denitrification equipment，in the course of work,Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，it has the functions of Promote sustainable development, Improve working conditions, Improve energy efficiency, environmental protection and Improve energy efficiency，Cheap and high quality。

Step furnace flue gas denitrification equipment

2、Step furnace flue gas denitrification equipment application

Step furnace flue gas denitrification equipmentIt has a wide range of uses, including Improve product quality, Promote sustainable development, Flue gas denitrification, Improve product quality and Promote sustainable development，Structure consists of Temperature control and monitoring system, Catalyst reactor, Flue gas mixing and distribution system, control system, Catalyst supply system and so on，it has the characteristics of Environment friendly, Less secondary pollution, Promote sustainable development, Mature technology and Strong adaptability，that is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，the principle is simple.Under the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.。

Step furnace flue gas denitrification equipment

3、Structural characteristics of Step furnace flue gas denitrification equipment

The Step furnace flue gas denitrification equipment structure is introduced as follows:

1. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

2. Flue gas mixing and distribution system

Ensure that the flue gas and reducing agent are fully mixed in the reactor to improve the denitrification efficiency.

3. control system

The whole Step furnace flue gas denitrification equipment is automatically controlled, including the adjustment of reducing agent supply, flue gas flow and temperature, so as to ensure the stable operation of the system and achieve the expected denitrification effect.

4. Temperature control and monitoring system

It is used to monitor and control the temperature of the reactor to ensure that the chemical reaction is carried out in the optimal temperature range.

5. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

Step furnace flue gas denitrification equipment

4、Step furnace flue gas denitrification equipment video detail

You can buy Step furnace flue gas denitrification equipment according to your needs and show you Step furnace flue gas denitrification equipment videos.。

Step furnace flue gas denitrification equipment

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the main structure includes Catalyst supply system, Flue gas mixing and distribution system, Catalyst reactor, control system, Temperature control and monitoring system and so on，Step furnace flue gas denitrification equipmentThe overall structural design is simple, diverse and beautiful.。

5、Step furnace flue gas denitrification equipment price concessions

The Step furnace flue gas denitrification equipment price is introduced as follows:

1. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Step furnace flue gas denitrification equipment manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Step furnace flue gas denitrification equipment price can meet the purchasing needs of customers.

2. Cost input

The manufacturing cost has a great influence on the price. There are many cost factors, including the purchase of raw materials and the quality of products. These factors are all cost inputs. One-combustion energy saving has made a strong balance between the cost input and the sales price, so that the quality of our products can be guaranteed and the comprehensive price of products can reach the degree of customer satisfaction.

3. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

4. market competition

The market has great fluctuation, which is also the key factor that leads to the imbalance and instability of supply and demand, and then leads to great changes in product prices. Only after a comprehensive understanding and investigation of the market can we make a reasonable decision, and then we can formulate a Step furnace flue gas denitrification equipment price sales plan that customers are satisfied with, and the main reason for its price rationality is also reflected here.

5. Different regions

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. One-combustion energy saving address:Jinan, Shandong province, where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

Step furnace flue gas denitrification equipment

6、One-combustion energy saving company discount

Step furnace flue gas denitrification equipment is a new type of SCR flue gas denitrification introduced by One-combustion energy saving manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for coal-fired power station and other industries. Now consult One-combustion energy savingproduction-manufacturing的Step furnace flue gas denitrification equipment, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Step furnace flue gas denitrification equipmentSimple structure and advanced technology.，structure mainly includes: Catalyst supply system, Temperature control and monitoring system, Flue gas mixing and distribution system, Catalyst reactor, control system and so on，It has a wide range of uses, and is often used inenvironmental protection,Meet the requirements of environmental protection,Flue gas denitrification,Improve product quality,environmental protection and so on，the product looks atmospheric.。