Introduction to Denitrification of flue gas from strip heating furnace, introduction to SCR denitration function advantages and characteristics

Denitrification of flue gas from strip heating furnacedelective catalytic reduction technology is an efficient flue gas denitrification technology.，the advantage is There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Denitrification of flue gas from strip heating furnace technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Denitrification of flue gas from strip heating furnace technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Denitrification of flue gas from strip heating furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Denitrification of flue gas from strip heating furnace technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Denitrification of flue gas from strip heating furnace technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、Technology has been developed and applied for many years, and it is mature and stable. The Denitrification of flue gas from strip heating furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Denitrification of flue gas from strip heating furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.，it is an ideal choice for customers to buy Denitrification of flue gas from strip heating furnace。

1、Brief introduction of Denitrification of flue gas from strip heating furnace

Denitrification of flue gas from strip heating furnaceis an efficient, stable and environment-friendly flue gas denitrification technology.。

Denitrification of flue gas from strip heating furnace

2、Denitrification of flue gas from strip heating furnace advantage

The advantages of Denitrification of flue gas from strip heating furnace are as follows:

1. Environmental friendliness

The by-products produced by Denitrification of flue gas from strip heating furnace technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Denitrification of flue gas from strip heating furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

2. Intelligent control and convenience of operation

The Denitrification of flue gas from strip heating furnace has gradually realized intelligent control. By integrating advanced control system and sensor technology, the Denitrification of flue gas from strip heating furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

3. Wide applicability

Denitrification of flue gas from strip heating furnace technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Denitrification of flue gas from strip heating furnace technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.

4. Intelligent control and convenience of operation

The Denitrification of flue gas from strip heating furnace has gradually realized intelligent control. By integrating advanced control system and sensor technology, the Denitrification of flue gas from strip heating furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

5. Environmental friendliness

The by-products produced by Denitrification of flue gas from strip heating furnace technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Denitrification of flue gas from strip heating furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

Denitrification of flue gas from strip heating furnace

3、Advantages of Denitrification of flue gas from strip heating furnace principle

Denitrification of flue gas from strip heating furnaceat runtime,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，The structural design is more advanced and reasonable.，the main structure includes control system, Flue gas mixing and distribution system, Temperature control and monitoring system, Catalyst supply system and Catalyst reactor，was developed and designed by One-combustion energy saving。

Denitrification of flue gas from strip heating furnace

4、Denitrification of flue gas from strip heating furnace introduction video

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Denitrification of flue gas from strip heating furnace production process and production site, and gain favorable comments and recognition from customers.。

Denitrification of flue gas from strip heating furnace

As you can see from the live video.，One-combustion energy saving at the start of the operation,Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.。

5、Denitrification of flue gas from strip heating furnace structure composition

The Denitrification of flue gas from strip heating furnace has the following structure

1. Temperature control and monitoring system

It is used to monitor and control the temperature of the reactor to ensure that the chemical reaction is carried out in the optimal temperature range.

2. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

3. Flue gas mixing and distribution system

Ensure that the flue gas and reducing agent are fully mixed in the reactor to improve the denitrification efficiency.

4. control system

The whole Denitrification of flue gas from strip heating furnace is automatically controlled to ensure the stable operation of the system and achieve the expected denitration effect.

5. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

Denitrification of flue gas from strip heating furnace

6、Introduction of Denitrification of flue gas from strip heating furnace characteristics

Denitrification of flue gas from strip heating furnace has the following characteristics

1. selectivity

Under the action of catalyst, the reducing agent mainly reacts with NOx selectively, but less with other components (such as oxygen) in flue gas, thus reducing unnecessary consumption.

2. Strong adaptability

Denitrification of flue gas from strip heating furnace technology can meet the needs of flue gas denitrification under different working conditions and has a wide range of applications.

3. high efficiency

Gate technology can effectively remove NOx from flue gas, and the denitrification efficiency can usually reach more than 90%.

4. Environmental protection

The final products of Denitrification of flue gas from strip heating furnace technology are harmless nitrogen and water vapor, which will not cause secondary pollution to the environment.

5. High denitration efficiency

The denitration efficiency of Denitrification of flue gas from strip heating furnace technology can reach more than 90%, and it is a widely used post-combustion denitration technology at present.

Denitrification of flue gas from strip heating furnace

Denitrification of flue gas from strip heating furnaceis a popular Denitrification of flue gas from strip heating furnace，multifunctional, with functions such as Promote sustainable development, Improve working conditions, environmental protection, Promote sustainable development and Improve energy efficiency。