Brief introduction of Continuous quenching and tempering heat treatment furnace

Continuous quenching and tempering heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

1、Brief introduction of Continuous quenching and tempering heat treatment furnace

Continuous quenching and tempering heat treatment furnaceIt is a forging heating device using gas as fuel.，Mainly used forImprove production efficiency,Energy conservation and environmental protection,Metal forging heating,Improve production efficiency andMetal tempering，is a common Continuous quenching and tempering heat treatment furnace，the product looks atmospheric.，energy-efficient,energy saving and environmental protection,Strong adaptability,energy-efficient,Easy to maintain。

Continuous quenching and tempering heat treatment furnace

2、Continuous quenching and tempering heat treatment furnace application

Continuous quenching and tempering heat treatment furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Continuous quenching and tempering heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Continuous quenching and tempering heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal tempering

By properly heating and cooling the metal material, the Continuous quenching and tempering heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Improve production efficiency

The Continuous quenching and tempering heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Energy conservation and environmental protection

The Continuous quenching and tempering heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Continuous quenching and tempering heat treatment furnace

3、Continuous quenching and tempering heat treatment furnace use

The purpose of Continuous quenching and tempering heat treatment furnace is introduced as follows:

1. Metal forging heating

The Continuous quenching and tempering heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Improve production efficiency

The Continuous quenching and tempering heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal forging heating

The Continuous quenching and tempering heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal tempering

By properly heating and cooling the metal material, the Continuous quenching and tempering heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Energy conservation and environmental protection

The Continuous quenching and tempering heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Continuous quenching and tempering heat treatment furnace

4、Continuous quenching and tempering heat treatment furnace real shot picture

A high-definition picture list of Continuous quenching and tempering heat treatment furnace is available for our customers to visit. The physical visit can be made to the factory. The address of the visit is Shandong(Province), and the time can be reserved in advance. The manufacturer has a special person to receive it.。

Continuous quenching and tempering heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Introduction of advantages of Continuous quenching and tempering heat treatment furnace

The advantages of Continuous quenching and tempering heat treatment furnace are as follows:

1. Rapid temperature rise

The Continuous quenching and tempering heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Intelligent control

The Continuous quenching and tempering heat treatment furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Uniform heating

The Continuous quenching and tempering heat treatment furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

4. Efficient combustion

The Continuous quenching and tempering heat treatment furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Continuous quenching and tempering heat treatment furnace

6、One-combustion energy saving company service

One-combustion energy saving manufacturer services include three aspects: pre-sale, in-sale and after-sale. Each stage is closely connected with each other, sincerely serving each customer, focusing on customer needs, providing customers with product knowledge training and regularly repairing products for customers, etc., which has been appreciated by new and old customers.。

One-combustion energy saving

Continuous quenching and tempering heat treatment furnaceIt can be used for Metal heat treatment, Energy conservation and environmental protection, Metal melting and casting, Metal forging heating, Improve production efficiency, Metal melting and casting and so on，at runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。