Introduction of Natural gas regenerative trolley heating furnace

Natural gas regenerative trolley heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.。

1、Brief introduction of Natural gas regenerative trolley heating furnace

Natural gas regenerative trolley heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，It is a product series that integrates Metal tempering, Metal heat treatment, Improve production efficiency, Energy conservation and environmental protection and Metal tempering，it is widely used in war industry, building materials, Household necessities, machinery, automobile and other industries。

Natural gas regenerative trolley heating furnace

2、Structural characteristics of Natural gas regenerative trolley heating furnace

The Natural gas regenerative trolley heating furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. furnace chamber

A space for holding metallic materials for heating.

5. Radiation chamber

The heat load of the main place for Natural gas regenerative trolley heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Natural gas regenerative trolley heating furnace

3、Working principle of Natural gas regenerative trolley heating furnace

Natural gas regenerative trolley heating furnacein the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it has the functions of Forging heating, Casting heating, temper, Forging heating and anneal，It is mostly used in Improve production efficiency, Metal forging heating, Energy conservation and environmental protection, Metal heat treatment, Metal melting and casting, Metal tempering and so on。

Natural gas regenerative trolley heating furnace

4、Natural gas regenerative trolley heating furnace video detail

On-site aerial photography of Natural gas regenerative trolley heating furnace。

Natural gas regenerative trolley heating furnace

As you can see from the live video.，One-combustion energy saving is a common Natural gas regenerative trolley heating furnace。

5、Natural gas regenerative trolley heating furnace HD real shot

Natural gas regenerative trolley heating furnace have various specifications and models, which can meet the diverse needs of users. The following are high-definition real pictures, which are exquisite in workmanship and trustworthy.。

Natural gas regenerative trolley heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Natural gas regenerative trolley heating furnaceIt can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，features include Stable and reliable, Strong adaptability, energy saving and environmental protection, energy saving and environmental protection and Easy to control。