Brief introduction and functional advantages of Segmented trolley forging heating furnace

Segmented trolley forging heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。The following is to introduce the Segmented trolley forging heating furnace:

1、Brief introduction of Segmented trolley forging heating furnace

Segmented trolley forging heating furnaceIt is a forging heating device using gas as fuel.，the main structure includes ventilation system, convection chamber, ventilation system, recovery of waste heat and combustor，Commonly used inMetal forging heating,Energy conservation and environmental protection,Metal tempering,Metal heat treatment,Energy conservation and environmental protection and so on，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，is developed and improved by One-combustion energy saving。

Segmented trolley forging heating furnace

2、Segmented trolley forging heating furnace working site

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Segmented trolley forging heating furnace production process and production site, and gain favorable comments and recognition from customers.。

Segmented trolley forging heating furnace

As you can see from the live video.，One-combustion energy saving Simple structure and reliable operation.，generally, it is composed of furnace chamber, Radiation chamber, combustor, Radiation chamber, recovery of waste heat and other major components。

3、Advantages of Segmented trolley forging heating furnace principle

Segmented trolley forging heating furnacein the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it is an ideal choice for customers to buy Segmented trolley forging heating furnace。

Segmented trolley forging heating furnace

4、Introduction of Segmented trolley forging heating furnace characteristics

Segmented trolley forging heating furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Segmented trolley forging heating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

2. Easy to maintain

The structural design of the Segmented trolley forging heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Segmented trolley forging heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Segmented trolley forging heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

5. Easy to control

The combustion system and ventilation system of the Segmented trolley forging heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Segmented trolley forging heating furnace

5、Segmented trolley forging heating furnace HD picture

High-definition pictures for various Segmented trolley forging heating furnace, panoramic display,the product looks atmospheric., reliable in quality and trustworthy.。

Segmented trolley forging heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、One-combustion energy saving delivery site

The following is the live video of Segmented trolley forging heating furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time. of Segmented trolley forging heating furnace.。

Segmented trolley forging heating furnace

As you can see from the live video.One-combustion energy saving at work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

Segmented trolley forging heating furnacewidely used inHousehold necessities,heat treatment,light industry,metallurgy,building materials and other industries，multifunctional, with functions such as normalizing, Casting heating, temper, heat treatment and Casting heating，Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.。