Brief introduction and advantages of Double door quenching trolley furnace

Double door quenching trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.。The following is to introduce the Double door quenching trolley furnace:

1、Brief introduction of Double door quenching trolley furnace

Double door quenching trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks atmospheric.，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，Widely used in Metal melting and casting, Metal forging heating, Metal tempering, Metal heat treatment and Improve production efficiency，features include Stable and reliable, energy saving and environmental protection, Easy to maintain, energy saving and environmental protection and Stable and reliable。

Double door quenching trolley furnace

2、Double door quenching trolley furnace function

Double door quenching trolley furnacemultifunctional, with functions such as temper, normalizing, hardening and tempering, heat treatment and Casting heating，usually used in metallurgy, pharmacy, Household necessities, material, pharmacy and other fields，it has the characteristics of energy-efficient, Strong adaptability, energy saving and environmental protection, Easy to control and Stable and reliable，can be customized according to user's needs.。

Double door quenching trolley furnace

3、Double door quenching trolley furnace use

The purpose of Double door quenching trolley furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Double door quenching trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Energy conservation and environmental protection

The Double door quenching trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Double door quenching trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal forging heating

The Double door quenching trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal heat treatment

In addition to forging heating, Double door quenching trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Double door quenching trolley furnace

4、Double door quenching trolley furnace video live broadcast

Speak directly with facts on the spot。

Double door quenching trolley furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd is a Double door quenching trolley furnace。

5、Double door quenching trolley furnace advantage

The advantages of Double door quenching trolley furnace are as follows:

1. Improve product quality

Because the Double door quenching trolley furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Efficient combustion

The Double door quenching trolley furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Rapid temperature rise

The Double door quenching trolley furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Wide application range

The Double door quenching trolley furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Intelligent control

The Double door quenching trolley furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

Double door quenching trolley furnace

6、Double door quenching trolley furnace price advantage

The Double door quenching trolley furnace price is introduced as follows:

1. Brand strength

At present, there are various brands of Double door quenching trolley furnace in Shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Double door quenching trolley furnace are different.

2. Model size

Specifications and models have a great influence on the price of Double door quenching trolley furnace, so different specifications and models have different selling prices. Customers can reasonably select product specifications and models according to their own needs, so that products can meet their own required standards in terms of specifications and prices.

3. Manufacturer's strength

At present, there are many manufacturers of products on the market, some of which belong to direct selling manufacturers and some belong to middlemen. Direct selling manufacturers will cost less than middlemen, so the quotation for products will be lower. Therefore, it is recommended that customers buy products from direct selling manufacturers of Double door quenching trolley furnace. In addition, even direct selling manufacturers have different capital status, strength level and technology, and the quotation for Double door quenching trolley furnace will be different.

4. Product technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

5. Self quality

Usually, the price of good quality products will be higher, because the product has higher technical content and more costs in raw materials and labor, but the performance of such products is higher and the profits will be higher. On the contrary, the price of ordinary quality products will be relatively lower, but the benefits will be correspondingly poor.

Double door quenching trolley furnace

Double door quenching trolley furnaceUsually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，energy-efficient,Strong adaptability,Easy to control,Easy to maintain,Stable and reliable。