Fully automatic heat treatment heating furnace detailed introduction

Fully automatic heat treatment heating furnaceIt is a forging heating device using gas as fuel.，It can be used for Metal tempering, Metal heat treatment, Improve production efficiency, Energy conservation and environmental protection, Metal heat treatment, Metal forging heating and so on，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，Simple structure and reliable operation.，the main structure includes furnace chamber, combustor, combustor, furnace chamber and convection chamber，Widely used in Metal melting and casting, Metal tempering, Improve production efficiency, Energy conservation and environmental protection and Metal tempering。

1、Brief introduction of Fully automatic heat treatment heating furnace

Fully automatic heat treatment heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

Fully automatic heat treatment heating furnace

2、Functional advantages of Fully automatic heat treatment heating furnace

Fully automatic heat treatment heating furnaces have the following advantages.

1. Efficient combustion

The Fully automatic heat treatment heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Fully automatic heat treatment heating furnace can significantly reduce energy consumption, thus reducing operating costs.

3. Wide application range

The Fully automatic heat treatment heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Intelligent control

The Fully automatic heat treatment heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. easy to operate

The operation interface of the Fully automatic heat treatment heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Fully automatic heat treatment heating furnace

3、Introduction of Fully automatic heat treatment heating furnace characteristics

Fully automatic heat treatment heating furnace has the following characteristics

1. Easy to maintain

The structural design of the Fully automatic heat treatment heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Stable and reliable

The Fully automatic heat treatment heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Fully automatic heat treatment heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Strong adaptability

The Fully automatic heat treatment heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Fully automatic heat treatment heating furnace

4、Fully automatic heat treatment heating furnace use

The purpose of Fully automatic heat treatment heating furnace is introduced as follows:

1. Metal forging heating

The Fully automatic heat treatment heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal heat treatment

In addition to forging heating, Fully automatic heat treatment heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Energy conservation and environmental protection

The Fully automatic heat treatment heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal tempering

By properly heating and cooling the metal material, the Fully automatic heat treatment heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Fully automatic heat treatment heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Fully automatic heat treatment heating furnace

5、Fully automatic heat treatment heating furnace quotation

The Fully automatic heat treatment heating furnace price is introduced as follows:

1. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Fully automatic heat treatment heating furnace have more or less differences in price.

2. cost of production

When the Fully automatic heat treatment heating furnace is manufactured, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

3. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Fully automatic heat treatment heating furnace price and service can meet the actual needs of customers.

4. Manufacturer's strength

Our factory is a direct selling manufacturer of Fully automatic heat treatment heating furnace, with independent production and processing facilities, few circulation links and low circulation cost.

5. quality factor

Quality is the fundamental factor that determines the price. The better the quality, the more detailed the manufacturing process, the more careful the materials are, the better the performance is, and the price will naturally be more expensive.

Fully automatic heat treatment heating furnace

6、Brief introduction of One-combustion energy saving

Shandong yiran energy-saving environment protection co., ltd, located in Shandong(Province), is a large Fully automatic heat treatment heating furnace manufacturer. The Fully automatic heat treatment heating furnace produced have good performance, low price, reasonable structure and excellent quality. The key is reasonable price. Welcome new and old customers to visit and buy.。

One-combustion energy saving

Fully automatic heat treatment heating furnacemultifunctional, with functions such as Casting heating, heat treatment, normalizing, hardening and tempering and Forging heating，it is widely used in light industry, surface treatment, petroleum, automobile, shipping and other industries。