Introduction to Automatic lid opening heating furnace, advantages, characteristics and principles of heating furnace

Automatic lid opening heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is a popular Automatic lid opening heating furnace，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。The following is to introduce the Automatic lid opening heating furnace:

1、Brief introduction of Automatic lid opening heating furnace

Automatic lid opening heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a Automatic lid opening heating furnace，the main features are Easy to maintain, Strong adaptability, energy saving and environmental protection, Easy to control and energy-efficient，multifunctional, with functions such as Forging heating, hardening and tempering, heat treatment, temper and anneal，Widely used inMetal heat treatment,Improve production efficiency,Metal forging heating,Metal heat treatment,Metal tempering and so on。

Automatic lid opening heating furnace

2、Physical picture of Automatic lid opening heating furnace

High-definition pictures of One-combustion energy saving Automatic lid opening heating furnace, showing different specifications and models.。

Automatic lid opening heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Automatic lid opening heating furnace advantage

The advantages of Automatic lid opening heating furnace are as follows:

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the Automatic lid opening heating furnace can significantly reduce energy consumption, thus reducing operating costs.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Wide application range

The Automatic lid opening heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Efficient combustion

The Automatic lid opening heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Rapid temperature rise

The Automatic lid opening heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Automatic lid opening heating furnace

4、Automatic lid opening heating furnace function

Automatic lid opening heating furnacemultifunctional, with functions such as normalizing, Casting heating, normalizing, anneal and temper。

Automatic lid opening heating furnace

5、How much is the Automatic lid opening heating furnace?

The Automatic lid opening heating furnace price is introduced as follows:

1. Self quality

The Automatic lid opening heating furnace is made of high-quality materials, and the cost of the product is high, so the price of the product will also rise. One-combustion energy saving has always adhered to high quality in the construction of Automatic lid opening heating furnace and won the trust of customers.

2. Different regions

The price of Automatic lid opening heating furnace in Jinan is much lower than that in other regions, and One-combustion energy saving is a large domestic Automatic lid opening heating furnace manufacturer not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Automatic lid opening heating furnace price positioning more reasonable, low-cost and economical.

3. Configuration difference

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Automatic lid opening heating furnace has a higher cost performance.

4. company strength

Our company's expected profit value of Automatic lid opening heating furnace is relatively low, and adopts the sales policy of small profits but quick turnover, so the price positioning of Automatic lid opening heating furnace is relatively low.

5. cost of production

When it comes to cost, I believe everyone has heard the saying "You get what you want for a price", which shows that the upfront cost of a product is directly proportional to its value. The upfront cost is high, the value is high, the quality is good, and the price is naturally high. The less the cost is, the lower the price is, and the quality is not good.

Automatic lid opening heating furnace

6、Why choose One-combustion energy saving?

Choosing a suitable Automatic lid opening heating furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Automatic lid opening heating furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Automatic lid opening heating furnaceit is widely used in light industry, pharmacy, Machinery manufacturing, war industry and petroleum，it has the functions of hardening and tempering, quench, Forging heating, heat treatment and Casting heating，it mainly includes recovery of waste heat, Radiation chamber, ventilation system, furnace chamber and combustor。