Introduction to Segmented heating furnace, introduction to forging furnace advantages and characteristics

Segmented heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks beautiful.，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。The following is to introduce the Segmented heating furnace:

1、Brief introduction of Segmented heating furnace

Segmented heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it has the functions of temper, normalizing, Casting heating, quench and heat treatment，is a Segmented heating furnace newly developed by One-combustion energy saving。

Segmented heating furnace

2、On-site real shot of Segmented heating furnace

The beauty of Segmented heating furnace comes from the detail design.。

Segmented heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Segmented heating furnace application

Segmented heating furnaces have the following purposes.

1. Metal forging heating

The Segmented heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Improve production efficiency

The Segmented heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal heat treatment

In addition to forging heating, Segmented heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Segmented heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal tempering

By properly heating and cooling the metal material, the Segmented heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Segmented heating furnace

4、Segmented heating furnace function

Segmented heating furnacemultifunctional, with functions such as Forging heating, Casting heating, quench, temper and normalizing，the main structure includes recovery of waste heat, combustor, furnace chamber, convection chamber and Radiation chamber，at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

Segmented heating furnace

5、Segmented heating furnace price consultation

The Segmented heating furnace price is introduced as follows:

1. Product technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

2. product configuration

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Segmented heating furnace has a higher cost performance.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Segmented heating furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Segmented heating furnace price can meet the purchasing needs of customers.

5. regional difference

One-combustion energy savingJinan, Shandong province, the transportation is convenient, and the corresponding cost of transporting Segmented heating furnace is low, which reduces the cost of selling Segmented heating furnace by manufacturers, and the price will also decrease.

Segmented heating furnace

6、One-combustion energy saving's after-sales service

Perfect after-sales service is One-combustion energy saving's business policy. Our company has a professional after-sales service team, and all customer service personnel and maintenance technicians need pre-job training before they can take up their posts. Before the sale, there are customer service personnel to cooperate with customers to do a good job in product selection, and at the same time provide detailed information such as Segmented heating furnace price and technical parameters; During the sale, sign a formal purchase contract with the customer and do a good job in product inspection to prevent leakage and delay the start-up time of the customer; After sale, we will provide customers with free transportation, installation and post-maintenance work. At the same time, we will pay regular return visits to the use of products. Once problems are found, we will send technicians to deal with them in time, and always keep the interests of customers doubled.。

One-combustion energy saving

Segmented heating furnaceit is usually composed of ventilation system, convection chamber, Radiation chamber, ventilation system and ventilation system，This Segmented heating furnaceThe overall structural design is simple, diverse and beautiful.，the advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，Widely used in Metal heat treatment, Energy conservation and environmental protection, Metal melting and casting, Metal tempering and Improve production efficiency。