Introduction to Angle iron heating furnace and heating furnace advantages and features

Angle iron heating furnaceIt is a forging heating device using gas as fuel.。

1、Brief introduction of Angle iron heating furnace

Angle iron heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，The price is relatively low.，modern technology。

Angle iron heating furnace

2、Angle iron heating furnace advantage

The advantages of Angle iron heating furnace are as follows:

1. Rapid temperature rise

The Angle iron heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Improve product quality

Because the Angle iron heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Wide application range

The Angle iron heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Extend the service life of equipment

The Angle iron heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Angle iron heating furnace

3、Angle iron heating furnace structure

The Angle iron heating furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. Radiation chamber

The heat load of the main place for Angle iron heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Angle iron heating furnace

4、Introduction of Angle iron heating furnace characteristics

Angle iron heating furnace has the following characteristics

1. Easy to control

The combustion system and ventilation system of the Angle iron heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Strong adaptability

The Angle iron heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Stable and reliable

The Angle iron heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Efficient heating

The Angle iron heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Angle iron heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Angle iron heating furnace

5、Video analysis of Angle iron heating furnace

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Angle iron heating furnacet operation, and helps customers to deeply understand the Angle iron heating furnace production process and production site, and gain favorable comments and recognition from customers.。

Angle iron heating furnace

As you can see from the live video.，One-combustion energy saving multifunctional, with functions such as quench, Forging heating, Casting heating, normalizing and hardening and tempering。

Angle iron heating furnacethe principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，Mainly used forEnergy conservation and environmental protection,Metal melting and casting,Metal heat treatment,Improve production efficiency andEnergy conservation and environmental protection。