What is a Metal material heating furnace? How much is the price of the Forging furnace?

Metal material heating furnaceIt is a forging heating device using gas as fuel.，at the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，It has a wide range of uses, including Metal tempering, Metal melting and casting, Metal forging heating, Metal heat treatment and Metal forging heating。The following is to introduce the Metal material heating furnace:

1、Brief introduction of Metal material heating furnace

Metal material heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Commonly used inImprove production efficiency,Metal melting and casting,Energy conservation and environmental protection,Metal tempering,Metal heat treatment and so on，features include Easy to control, Strong adaptability, Easy to maintain, Easy to control and Stable and reliable，is designed by One-combustion energy saving with advanced technology。

Metal material heating furnace

2、Structural characteristics of Metal material heating furnace

The Metal material heating furnace has the following structure

1. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

2. furnace chamber

A space for holding metallic materials for heating.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Metal material heating furnace

3、Metal material heating furnace use

The purpose of Metal material heating furnace is introduced as follows:

1. Improve production efficiency

The Metal material heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal forging heating

The Metal material heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal tempering

By properly heating and cooling the metal material, the Metal material heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal heat treatment

In addition to forging heating, Metal material heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Energy conservation and environmental protection

The Metal material heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Metal material heating furnace

4、Metal material heating furnace principle

Metal material heating furnaceHeat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。

Metal material heating furnace

5、Metal material heating furnace characteristics

The Metal material heating furnace features are as follows:

1. Easy to control

The combustion system and ventilation system of the Metal material heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Efficient heating

The Metal material heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Stable and reliable

The Metal material heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Strong adaptability

The Metal material heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Easy to maintain

The structural design of the Metal material heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Metal material heating furnace

6、company profile

One-combustion energy saving is a professional and large-scale Metal material heating furnace manufacturer, which has many years of production and operation, complete production facilities, skilled staff and high production capacity and product quality. It is a Metal material heating furnace manufacturer trusted by consumers at present.。

One-combustion energy saving

Metal material heating furnaceis a Metal material heating furnace，the product looks beautiful.，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。