What is a Round bar heating furnace? Introduction to the advantages and characteristics of Forging furnace functions

Round bar heating furnaceIt is a forging heating device using gas as fuel.。

1、Brief introduction of Round bar heating furnace

Round bar heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，be loved by our customers.。

Round bar heating furnace

2、Round bar heating furnace use

The purpose of Round bar heating furnace is introduced as follows:

1. Energy conservation and environmental protection

The Round bar heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal heat treatment

In addition to forging heating, Round bar heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Energy conservation and environmental protection

The Round bar heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Improve production efficiency

The Round bar heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal tempering

By properly heating and cooling the metal material, the Round bar heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Round bar heating furnace

3、Advantages of Round bar heating furnace principle

Round bar heating furnacethe principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it is usually composed of convection chamber, Radiation chamber, ventilation system, furnace chamber and recovery of waste heat，the main features are Easy to control, energy-efficient, Easy to control, Easy to maintain and energy saving and environmental protection，is a kind of high quality and low price Round bar heating furnace，it can be used in heat treatment, Machinery manufacturing, electron, automobile, pharmacy and other industries。

Round bar heating furnace

4、Round bar heating furnace structure

The Round bar heating furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Radiation chamber

The heat load of the main place for Round bar heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. furnace chamber

A space for holding metallic materials for heating.

Round bar heating furnace

5、Round bar heating furnace performance advantage

Round bar heating furnaces have the following advantages.

1. Uniform heating

The Round bar heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. Wide application range

The Round bar heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Extend the service life of equipment

The Round bar heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Efficient combustion

The Round bar heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Improve product quality

Because the Round bar heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Round bar heating furnace

6、One-combustion energy saving's strength

The company has many years of Round bar heating furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Round bar heating furnaceIt is a product series that integrates Metal melting and casting, Energy conservation and environmental protection, Metal tempering, Metal heat treatment and Improve production efficiency，at the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。