Introduction to Solid state heat treatment industrial furnace, introduction to Forging furnace advantages and characteristics

Solid state heat treatment industrial furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it is an ideal choice for customers to buy Solid state heat treatment industrial furnace。

1、Brief introduction of Solid state heat treatment industrial furnace

Solid state heat treatment industrial furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，The overall structural design is simple, diverse and beautiful.，Structure consists of ventilation system, furnace chamber, combustor, Radiation chamber, recovery of waste heat and so on。

Solid state heat treatment industrial furnace

2、Solid state heat treatment industrial furnace application

Solid state heat treatment industrial furnaces have the following purposes.

1. Improve production efficiency

The Solid state heat treatment industrial furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal tempering

By properly heating and cooling the metal material, the Solid state heat treatment industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Energy conservation and environmental protection

The Solid state heat treatment industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Solid state heat treatment industrial furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal heat treatment

In addition to forging heating, Solid state heat treatment industrial furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Solid state heat treatment industrial furnace

3、Solid state heat treatment industrial furnace structure composition

The Solid state heat treatment industrial furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. furnace chamber

A space for holding metallic materials for heating.

4. Radiation chamber

The heat load of the main place for Solid state heat treatment industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Solid state heat treatment industrial furnace

4、Functional advantages of Solid state heat treatment industrial furnace

Solid state heat treatment industrial furnaces have the following advantages.

1. Intelligent control

The Solid state heat treatment industrial furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. easy to operate

The operation interface of the Solid state heat treatment industrial furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Extend the service life of equipment

The Solid state heat treatment industrial furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Wide application range

The Solid state heat treatment industrial furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Improve product quality

Because the Solid state heat treatment industrial furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Solid state heat treatment industrial furnace

5、Solid state heat treatment industrial furnace explanation video

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Solid state heat treatment industrial furnace production process and production site, and gain favorable comments and recognition from customers.。

Solid state heat treatment industrial furnace

As you can see from the live video.，One-combustion energy saving the product looks beautiful.。

6、Solid state heat treatment industrial furnace introduction video

On-site aerial photography of Solid state heat treatment industrial furnace。

Solid state heat treatment industrial furnace

As you can see from the live video.，One-combustion energy saving it has the functions of normalizing, temper, heat treatment, Casting heating and quench。

Solid state heat treatment industrial furnaceit can be used in surface treatment, petroleum, pharmacy, electron, chemical industry and other industries，the main features are Easy to maintain, Easy to control, Stable and reliable, Easy to control and Easy to maintain。