Introduction to Intelligent high-temperature industrial furnace, heating furnace specifications, model parameters

Intelligent high-temperature industrial furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，multifunctional, with functions such as Casting heating, quench, anneal, heat treatment and hardening and tempering，reliable quality。The following is to introduce the Intelligent high-temperature industrial furnace:

1、Brief introduction of Intelligent high-temperature industrial furnace

Intelligent high-temperature industrial furnaceIt is a forging heating device using gas as fuel.，it can be used in surface treatment, shipping, petroleum, metallurgy, building materials and other industries，is a kind of Intelligent high-temperature industrial furnace manufactured by One-combustion energy saving。

Intelligent high-temperature industrial furnace

2、Intelligent high-temperature industrial furnace video live broadcast

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Intelligent high-temperature industrial furnace production process and production site, and gain favorable comments and recognition from customers.。

Intelligent high-temperature industrial furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it has the functions of heat treatment, Forging heating, anneal, quench and temper。

3、Structural advantages of Intelligent high-temperature industrial furnace

The Intelligent high-temperature industrial furnace has the following structure

1. Radiation chamber

The heat load of the main place for Intelligent high-temperature industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. furnace chamber

A space for holding metallic materials for heating.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Intelligent high-temperature industrial furnace

4、Intelligent high-temperature industrial furnace characteristics

The Intelligent high-temperature industrial furnace features are as follows:

1. Easy to control

The combustion system and ventilation system of the Intelligent high-temperature industrial furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Easy to maintain

The structural design of the Intelligent high-temperature industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Easy to maintain

The structural design of the Intelligent high-temperature industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The Intelligent high-temperature industrial furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Intelligent high-temperature industrial furnace

5、Intelligent high-temperature industrial furnace function

Intelligent high-temperature industrial furnacemultifunctional, with functions such as hardening and tempering, Casting heating, normalizing, heat treatment and normalizing，Mainly used forMetal melting and casting,Energy conservation and environmental protection,Metal tempering,Metal forging heating andImprove production efficiency，is a common Intelligent high-temperature industrial furnace。

Intelligent high-temperature industrial furnace

Intelligent high-temperature industrial furnaceusually used in light industry, Machinery manufacturing, Household necessities, machinery, electron and other fields，the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。