Introduction to Continuous decarbonization annealing furnace, introduction to Forging furnace function advantages and characteristics

Continuous decarbonization annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

1、Brief introduction of Continuous decarbonization annealing furnace

Continuous decarbonization annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a common Continuous decarbonization annealing furnace，multifunctional, with functions such as heat treatment, Forging heating, Casting heating, hardening and tempering and anneal，can be customized according to user's needs.。

Continuous decarbonization annealing furnace

2、Video analysis of Continuous decarbonization annealing furnace

The following is the live video of Continuous decarbonization annealing furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials. of One-combustion energy savingproduce的Continuous decarbonization annealing furnace.。

Continuous decarbonization annealing furnace

As you can see from the live video.，One-combustion energy saving it has the functions of quench, Forging heating, temper, normalizing and Casting heating。

3、Continuous decarbonization annealing furnace application

Continuous decarbonization annealing furnaces have the following purposes.

1. Energy conservation and environmental protection

The Continuous decarbonization annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal heat treatment

In addition to forging heating, Continuous decarbonization annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal heat treatment

In addition to forging heating, Continuous decarbonization annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Improve production efficiency

The Continuous decarbonization annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal tempering

By properly heating and cooling the metal material, the Continuous decarbonization annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Continuous decarbonization annealing furnace

4、Structural advantages of Continuous decarbonization annealing furnace

The Continuous decarbonization annealing furnace has the following structure

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. furnace chamber

A space for holding metallic materials for heating.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. Radiation chamber

The heat load of the main place for Continuous decarbonization annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Continuous decarbonization annealing furnace

5、Continuous decarbonization annealing furnace advantage

The advantages of Continuous decarbonization annealing furnace are as follows:

1. Multiple fuel options

Although the Continuous decarbonization annealing furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. Rapid temperature rise

The Continuous decarbonization annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

3. Extend the service life of equipment

The Continuous decarbonization annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Intelligent control

The Continuous decarbonization annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Efficient combustion

The Continuous decarbonization annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Continuous decarbonization annealing furnace

6、Brief introduction of One-combustion energy saving

Shandong yiran energy-saving environment protection co., ltd, located in Jinan, is a large Continuous decarbonization annealing furnace manufacturer. The Continuous decarbonization annealing furnace produced have good performance, low price, reasonable structure and excellent quality. The key is reasonable price. Welcome new and old customers to visit and buy.。

One-combustion energy saving

Continuous decarbonization annealing furnacethe advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，energy-efficient,energy saving and environmental protection,Stable and reliable,Easy to maintain,energy-efficient。