What is a Automatic feeding annealing heat treatment furnace? Introduction to the principle of Forging furnace structure

Automatic feeding annealing heat treatment furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。The following is to introduce the Automatic feeding annealing heat treatment furnace:

1、Brief introduction of Automatic feeding annealing heat treatment furnace

Automatic feeding annealing heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，It is a product series that integrates Energy conservation and environmental protection, Metal melting and casting, Metal tempering, Metal forging heating and Improve production efficiency，the product looks beautiful.，It is mostly used in Metal heat treatment, Energy conservation and environmental protection, Metal melting and casting, Metal tempering, Metal forging heating, Improve production efficiency and so on，is a Automatic feeding annealing heat treatment furnace。

Automatic feeding annealing heat treatment furnace

2、Automatic feeding annealing heat treatment furnace advantage

The advantages of Automatic feeding annealing heat treatment furnace are as follows:

1. Efficient combustion

The Automatic feeding annealing heat treatment furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. Extend the service life of equipment

The Automatic feeding annealing heat treatment furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Rapid temperature rise

The Automatic feeding annealing heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Intelligent control

The Automatic feeding annealing heat treatment furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Extend the service life of equipment

The Automatic feeding annealing heat treatment furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Automatic feeding annealing heat treatment furnace

3、Automatic feeding annealing heat treatment furnace principle

Automatic feeding annealing heat treatment furnaceat runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，Cheap and high quality。

Automatic feeding annealing heat treatment furnace

4、Automatic feeding annealing heat treatment furnace use

The purpose of Automatic feeding annealing heat treatment furnace is introduced as follows:

1. Improve production efficiency

The Automatic feeding annealing heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal forging heating

The Automatic feeding annealing heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Energy conservation and environmental protection

The Automatic feeding annealing heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal tempering

By properly heating and cooling the metal material, the Automatic feeding annealing heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal forging heating

The Automatic feeding annealing heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Automatic feeding annealing heat treatment furnace

5、Automatic feeding annealing heat treatment furnace structure

The Automatic feeding annealing heat treatment furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Automatic feeding annealing heat treatment furnace

6、Brief introduction of Automatic feeding annealing heat treatment furnace

Automatic feeding annealing heat treatment furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，multifunctional, with functions such as hardening and tempering, quench, hardening and tempering, temper and normalizing，is designed by One-combustion energy saving with advanced technology。

Automatic feeding annealing heat treatment furnace

Automatic feeding annealing heat treatment furnaceit can be used in machinery, pharmacy, Household necessities, building materials, automobile and other industries，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has the characteristics of Easy to control, Stable and reliable, energy saving and environmental protection, Strong adaptability and energy-efficient。