Introduction to Pull rod annealing industrial furnace and heating furnace structure principle

Pull rod annealing industrial furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is a Pull rod annealing industrial furnace，features include Strong adaptability, Easy to maintain, Easy to control, Strong adaptability and energy-efficient，be loved by our customers.。

1、Brief introduction of Pull rod annealing industrial furnace

Pull rod annealing industrial furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it is an ideal choice for customers to buy Pull rod annealing industrial furnace。

Pull rod annealing industrial furnace

2、Structural advantages of Pull rod annealing industrial furnace

The Pull rod annealing industrial furnace has the following structure

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. Radiation chamber

The heat load of the main place for Pull rod annealing industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Pull rod annealing industrial furnace

3、Functional advantages of Pull rod annealing industrial furnace

Pull rod annealing industrial furnaces have the following advantages.

1. Efficient combustion

The Pull rod annealing industrial furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. Extend the service life of equipment

The Pull rod annealing industrial furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. easy to operate

The operation interface of the Pull rod annealing industrial furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Uniform heating

The Pull rod annealing industrial furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Intelligent control

The Pull rod annealing industrial furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

Pull rod annealing industrial furnace

4、Video analysis of Pull rod annealing industrial furnace

On-site aerial photography of Pull rod annealing industrial furnace。

Pull rod annealing industrial furnace

As you can see from the live video.，One-combustion energy saving the product looks beautiful.。

5、Introduction of Pull rod annealing industrial furnace characteristics

Pull rod annealing industrial furnace has the following characteristics

1. Easy to maintain

The structural design of the Pull rod annealing industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Easy to control

The combustion system and ventilation system of the Pull rod annealing industrial furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Easy to maintain

The structural design of the Pull rod annealing industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Strong adaptability

The Pull rod annealing industrial furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Pull rod annealing industrial furnace

Pull rod annealing industrial furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，multifunctional, with functions such as normalizing, temper, heat treatment, Forging heating and hardening and tempering。