What is a Carburizing quenching furnace? Introduction to the advantages and characteristics of forging furnace functions

Carburizing quenching furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a Carburizing quenching furnace。

1、Brief introduction of Carburizing quenching furnace

Carburizing quenching furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it has the characteristics of energy saving and environmental protection, Stable and reliable, Strong adaptability, Easy to maintain and Easy to control，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.。

Carburizing quenching furnace

2、Carburizing quenching furnace structure

The Carburizing quenching furnace structure is introduced as follows:

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Radiation chamber

The heat load of the main place for Carburizing quenching furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. furnace chamber

A space for holding metallic materials for heating.

Carburizing quenching furnace

3、Carburizing quenching furnace use

The purpose of Carburizing quenching furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Carburizing quenching furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Energy conservation and environmental protection

The Carburizing quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Carburizing quenching furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Improve production efficiency

The Carburizing quenching furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Energy conservation and environmental protection

The Carburizing quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Carburizing quenching furnace

4、On-site real shot of Carburizing quenching furnace

Details of One-combustion energy saving Carburizing quenching furnace,the product looks atmospheric.。

Carburizing quenching furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Carburizing quenching furnace characteristics

The Carburizing quenching furnace features are as follows:

1. Efficient heating

The Carburizing quenching furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Carburizing quenching furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Stable and reliable

The Carburizing quenching furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to maintain

The structural design of the Carburizing quenching furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The Carburizing quenching furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Carburizing quenching furnace

6、company introduction

Shandong yiran energy-saving environment protection co., ltd, located in Jinan, is a large Carburizing quenching furnace manufacturer. The Carburizing quenching furnace produced have good performance, low price, reasonable structure and excellent quality. The key is reasonable price. Welcome new and old customers to visit and buy.。

One-combustion energy saving

Carburizing quenching furnaceit is mainly composed of ventilation system, recovery of waste heat, combustor, convection chamber and combustor，It is mostly used in Metal melting and casting, Metal heat treatment, Improve production efficiency, Metal tempering, Energy conservation and environmental protection, Metal melting and casting and so on。