Introduction to Regenerative gas chamber furnace and Forging furnace advantages and features

Regenerative gas chamber furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Simple structure and reliable operation.，it is mainly composed of ventilation system, recovery of waste heat, convection chamber, Radiation chamber and convection chamber，Easy to maintain,energy-efficient,Strong adaptability,energy saving and environmental protection,Easy to control，is a Regenerative gas chamber furnace，customizable。The following is to introduce the Regenerative gas chamber furnace:

1、Brief introduction of Regenerative gas chamber furnace

Regenerative gas chamber furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it is widely used in automobile, petroleum, surface treatment, heat treatment and war industry，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.。

Regenerative gas chamber furnace

2、Regenerative gas chamber furnace function

Regenerative gas chamber furnacemultifunctional, with functions such as quench, normalizing, anneal, hardening and tempering and temper。

Regenerative gas chamber furnace

3、Regenerative gas chamber furnace field real shot

On-site aerial photography of Regenerative gas chamber furnace。

Regenerative gas chamber furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd is a popular Regenerative gas chamber furnace。

4、Regenerative gas chamber furnace structure

The Regenerative gas chamber furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. furnace chamber

A space for holding metallic materials for heating.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Regenerative gas chamber furnace

5、Regenerative gas chamber furnace use

The purpose of Regenerative gas chamber furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Regenerative gas chamber furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Energy conservation and environmental protection

The Regenerative gas chamber furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal forging heating

The Regenerative gas chamber furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Improve production efficiency

The Regenerative gas chamber furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal heat treatment

In addition to forging heating, Regenerative gas chamber furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Regenerative gas chamber furnace

6、How much is the Regenerative gas chamber furnace?

The Regenerative gas chamber furnace price is introduced as follows:

1. Manufacturer scale

Our factory is a direct selling manufacturer of Regenerative gas chamber furnace, with independent production and processing facilities, few circulation links and low circulation cost.

2. Brand strength

At present, there are various brands of Regenerative gas chamber furnace in Shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Regenerative gas chamber furnace are different.

3. market quotation

If there is a large demand for Regenerative gas chamber furnace in the market, the price of Regenerative gas chamber furnace will naturally become higher. On the contrary, if the supply of this product exceeds demand, then manufacturers will have inventory accumulation. In order to dispose of these products as soon as possible, some manufacturers will sell them by lowering the price of products, so the price will become lower.

4. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

5. deploy

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Regenerative gas chamber furnace has a higher cost performance.

Regenerative gas chamber furnace

Regenerative gas chamber furnacethe main structure includes ventilation system, ventilation system, combustor, Radiation chamber and recovery of waste heat，productThe overall structural design is relatively simple and compact.，it can be used in electron, surface treatment, pharmacy, petroleum, light industry and other industries，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。