Introduction to Automatic greenhouse furnace and heating furnace advantages and features

Automatic greenhouse furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，It can be used for Metal melting and casting, Metal forging heating, Metal tempering, Metal heat treatment, Energy conservation and environmental protection, Energy conservation and environmental protection and so on，the advantage is Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，at runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，is a Automatic greenhouse furnace。

1、Brief introduction of Automatic greenhouse furnace

Automatic greenhouse furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，it is widely used in machinery, light industry, building materials, shipping, material and other industries。

Automatic greenhouse furnace

2、Automatic greenhouse furnace performance advantage

Automatic greenhouse furnaces have the following advantages.

1. Intelligent control

The Automatic greenhouse furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Wide application range

The Automatic greenhouse furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Automatic greenhouse furnace can significantly reduce energy consumption, thus reducing operating costs.

4. easy to operate

The operation interface of the Automatic greenhouse furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Efficient combustion

The Automatic greenhouse furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Automatic greenhouse furnace

3、Automatic greenhouse furnace customer scene picture

A variety of series of Automatic greenhouse furnace pictures are displayed, with exquisite design, reliable quality and trustworthiness.。

Automatic greenhouse furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Structural characteristics of Automatic greenhouse furnace

The Automatic greenhouse furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. furnace chamber

A space for holding metallic materials for heating.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Automatic greenhouse furnace

5、Automatic greenhouse furnace principle

Automatic greenhouse furnaceHeat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，It is a forging heating device using gas as fuel.，is carefully developed by One-combustion energy saving combined with advanced technology。

Automatic greenhouse furnace

Automatic greenhouse furnaceis a kind of high quality and low price Automatic greenhouse furnace，multifunctional, with functions such as hardening and tempering, Casting heating, anneal, anneal and Casting heating，it has been widely used in aerospace, pharmacy, automobile, metallurgy, Household necessities and other industries。