What is a Mold trolley heating furnace? heating furnace specifications, models, and parameters

Mold trolley heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，be loved by our customers.。

1、Brief introduction of Mold trolley heating furnace

Mold trolley heating furnaceIt is a forging heating device using gas as fuel.。

Mold trolley heating furnace

2、Functional advantages of Mold trolley heating furnace

Mold trolley heating furnaces have the following advantages.

1. easy to operate

The operation interface of the Mold trolley heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Efficient combustion

The Mold trolley heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Mold trolley heating furnace can significantly reduce energy consumption, thus reducing operating costs.

4. Extend the service life of equipment

The Mold trolley heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. Uniform heating

The Mold trolley heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Mold trolley heating furnace

3、Functional advantages of Mold trolley heating furnace

Mold trolley heating furnaces have the following advantages.

1. Improve product quality

Because the Mold trolley heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Intelligent control

The Mold trolley heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Extend the service life of equipment

The Mold trolley heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Mold trolley heating furnace

4、Introduction of Mold trolley heating furnace characteristics

Mold trolley heating furnace has the following characteristics

1. Easy to maintain

The structural design of the Mold trolley heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The Mold trolley heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Stable and reliable

The Mold trolley heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to maintain

The structural design of the Mold trolley heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Mold trolley heating furnace

5、Structural advantages of Mold trolley heating furnace

The Mold trolley heating furnace has the following structure

1. Radiation chamber

The heat load of the main place for Mold trolley heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. furnace chamber

A space for holding metallic materials for heating.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Radiation chamber

The heat load of the main place for Mold trolley heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Mold trolley heating furnace

6、How much is the Mold trolley heating furnace?

The Mold trolley heating furnace price is introduced as follows:

1. market quotation

This factor is directly related to the economic dynamics. When the economic dynamics are unstable, the relationship between supply and demand will be unbalanced, which will lead to a very large fluctuation in the price of Mold trolley heating furnace. Therefore, we should also be aware of the relationship between this factor and the price during the price setting process.

2. Configuration level

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Mold trolley heating furnace are closely related. One-combustion energy saving has comprehensively measured the configuration and sales price of products when designing Mold trolley heating furnace, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

3. Product technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

4. quality factor

Quality is the fundamental factor that determines the price. The better the quality, the more detailed the manufacturing process, the more careful the materials are, the better the performance is, and the price will naturally be more expensive.

5. select a qualified person

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

Mold trolley heating furnace

Mold trolley heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，widely used in automobile, chemical industry, heat treatment, Machinery manufacturing, petroleum and other fields。