What is a Mold trolley forging furnace? Introduction to the advantages and characteristics of forging furnace functions

Mold trolley forging furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it mainly includes furnace chamber, convection chamber, ventilation system, recovery of waste heat and Radiation chamber，This productThe overall structural design is simple and novel.，the product looks atmospheric.，is a common Mold trolley forging furnace，it has the characteristics of Strong adaptability, Easy to maintain, Strong adaptability, energy saving and environmental protection and energy-efficient。The following is to introduce the Mold trolley forging furnace:

1、Brief introduction of Mold trolley forging furnace

Mold trolley forging furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，multifunctional, with functions such as Casting heating, temper, normalizing, hardening and tempering and Forging heating，It is a product series that integrates Improve production efficiency, Metal melting and casting, Improve production efficiency, Metal heat treatment and Metal forging heating，support customization。

Mold trolley forging furnace

2、Advantages of Mold trolley forging furnace principle

Mold trolley forging furnaceat the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it has been widely used in automobile, petroleum, electron, Household necessities, war industry and other industries，is a Mold trolley forging furnace，favorable price。

Mold trolley forging furnace

3、Mold trolley forging furnace application

Mold trolley forging furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Mold trolley forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal tempering

By properly heating and cooling the metal material, the Mold trolley forging furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal forging heating

The Mold trolley forging furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Energy conservation and environmental protection

The Mold trolley forging furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Improve production efficiency

The Mold trolley forging furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Mold trolley forging furnace

4、Mold trolley forging furnace customer scene picture

The Mold trolley forging furnace is designed by One-combustion energy saving with advanced technology, and the product has high performance advantages. In order to facilitate our customers to find a satisfactory forging furnace more quickly, the following high-definition pictures are provided for reference.。

Mold trolley forging furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、How much is the Mold trolley forging furnace?

The Mold trolley forging furnace price is introduced as follows:

1. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Mold trolley forging furnace have more or less differences in price.

2. raw material

The quality of material selection is one of the main factors that directly affect the Mold trolley forging furnace. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

3. Product configuration difference

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Mold trolley forging furnace are closely related. One-combustion energy saving has comprehensively measured the configuration and sales price of products when designing Mold trolley forging furnace, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

4. Self quality

Quality is one of the fundamental and important factors that affect the price. Usually, the better the quality of the Mold trolley forging furnace, the higher its price, and the quality is mainly affected by the manufacturing process, raw material materials, workers' experience and other factors. Therefore, if customers want to buy products with better quality, they can conduct on-the-spot visits to the product manufacturers to learn more about the scale, manufacturing process and production capacity of the manufacturers, so as to comprehensively judge the quality of the products.

5. Reasonable cost

The manufacturer has a fixed raw material supplier, so that the raw material price given by the raw material supplier to the manufacturer will be lower, the raw material cost invested by the manufacturer will be reduced, and the price of the Mold trolley forging furnace will also be reduced.

Mold trolley forging furnace

6、One-combustion energy saving company discount

Mold trolley forging furnace is a new type of forging furnace introduced by One-combustion energy saving manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for electron and other industries. Now consult One-combustion energy savingproduction-manufacturing的Mold trolley forging furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Mold trolley forging furnaceIt can be used for Energy conservation and environmental protection, Metal tempering, Metal melting and casting, Metal forging heating, Metal tempering, Metal heat treatment and so on，Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，the product looks atmospheric.。