What is a Trolley type annealing furnace? Introduction to the advantages and characteristics of the Forging furnace

Trolley type annealing furnaceIt is a forging heating device using gas as fuel.，is a Trolley type annealing furnace newly developed by One-combustion energy saving。The following is to introduce the Trolley type annealing furnace:

1、Brief introduction of Trolley type annealing furnace

Trolley type annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，modern technology，low in price。

Trolley type annealing furnace

2、Trolley type annealing furnace use

The purpose of Trolley type annealing furnace is introduced as follows:

1. Metal forging heating

The Trolley type annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Trolley type annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Energy conservation and environmental protection

The Trolley type annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal heat treatment

In addition to forging heating, Trolley type annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal forging heating

The Trolley type annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Trolley type annealing furnace

3、Trolley type annealing furnace use

The purpose of Trolley type annealing furnace is introduced as follows:

1. Improve production efficiency

The Trolley type annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal tempering

By properly heating and cooling the metal material, the Trolley type annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Trolley type annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Improve production efficiency

The Trolley type annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal heat treatment

In addition to forging heating, Trolley type annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Trolley type annealing furnace

4、Trolley type annealing furnace performance advantage

Trolley type annealing furnaces have the following advantages.

1. Uniform heating

The Trolley type annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. Extend the service life of equipment

The Trolley type annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Improve product quality

Because the Trolley type annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Efficient combustion

The Trolley type annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Rapid temperature rise

The Trolley type annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Trolley type annealing furnace

5、Trolley type annealing furnace characteristics

The Trolley type annealing furnace features are as follows:

1. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Trolley type annealing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

2. Easy to maintain

The structural design of the Trolley type annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Stable and reliable

The Trolley type annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Trolley type annealing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Trolley type annealing furnace

Trolley type annealing furnaceit is widely used in heat treatment, petroleum, metallurgy, aerospace, electron and other industries，Widely used inMetal tempering,Metal melting and casting,Metal forging heating,Improve production efficiency,Energy conservation and environmental protection and so on，the product looks beautiful.。