Introduction to Environmentally friendly indoor heating furnace and heating furnace working principle

Environmentally friendly indoor heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Widely used in Metal melting and casting, Improve production efficiency, Metal heat treatment, Metal forging heating and Energy conservation and environmental protection，the product looks atmospheric.，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，features include Stable and reliable, Easy to maintain, energy-efficient, Stable and reliable and energy saving and environmental protection。The following is to introduce the Environmentally friendly indoor heating furnace:

1、Brief introduction of Environmentally friendly indoor heating furnace

Environmentally friendly indoor heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it is usually composed of Radiation chamber, recovery of waste heat, ventilation system, combustor and ventilation system，This productSimple structure and reliable operation.，at runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，is a popular Environmentally friendly indoor heating furnace，can be customized according to user's needs.。

Environmentally friendly indoor heating furnace

2、Working principle of Environmentally friendly indoor heating furnace

Environmentally friendly indoor heating furnaceat work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the product looks atmospheric.，it has the characteristics of Strong adaptability, Easy to control, energy saving and environmental protection, energy-efficient and Easy to maintain，widely used in metallurgy, shipping, aerospace, Machinery manufacturing, pharmacy and other fields，it is mainly composed of convection chamber, recovery of waste heat, combustor, ventilation system and furnace chamber，productThe overall structural design is simple, diverse and beautiful.。

Environmentally friendly indoor heating furnace

3、Environmentally friendly indoor heating furnace function

Environmentally friendly indoor heating furnacemultifunctional, with functions such as heat treatment, quench, temper, Casting heating and Forging heating，the product looks atmospheric.，features include Easy to control, Strong adaptability, Stable and reliable, energy saving and environmental protection and Stable and reliable，is a kind of high quality and low price Environmentally friendly indoor heating furnace，Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Environmentally friendly indoor heating furnace

4、Environmentally friendly indoor heating furnace use

The purpose of Environmentally friendly indoor heating furnace is introduced as follows:

1. Energy conservation and environmental protection

The Environmentally friendly indoor heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Environmentally friendly indoor heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Environmentally friendly indoor heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The Environmentally friendly indoor heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal heat treatment

In addition to forging heating, Environmentally friendly indoor heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Environmentally friendly indoor heating furnace

5、How much is the Environmentally friendly indoor heating furnace?

The Environmentally friendly indoor heating furnace price is introduced as follows:

1. specifications and models

The price of Environmentally friendly indoor heating furnace mainly depends on its different specifications. The products with larger specifications will have higher relative products and bring more benefits to customers.

2. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Environmentally friendly indoor heating furnace price and service can meet the actual needs of customers.

3. manufacturing cost

Production costs include raw material costs, labor costs, other costs, etc., which manufacturers need to invest when producing products, but these factors are not certain. They are affected by the market. When one factor in the market changes, the production costs of manufacturers will also change, and the price of Environmentally friendly indoor heating furnace will also fluctuate to some extent.

4. raw material

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

5. market competition

The difference between the supply and demand of manufacturers and customers will also affect the Environmentally friendly indoor heating furnace price. When the demand of customers on the market increases and the supply of products by manufacturers is small, the Environmentally friendly indoor heating furnace price will increase with the increase of demand. On the contrary, when the supply of product manufacturers on the market exceeds the demand of customers, the Environmentally friendly indoor heating furnace price will decrease.

Environmentally friendly indoor heating furnace

6、One-combustion energy saving workshop real shot

On-site aerial photography of Environmentally friendly indoor heating furnace。

Environmentally friendly indoor heating furnace

As you can see from the live video.One-combustion energy saving the main features are Easy to maintain, Easy to control, Strong adaptability, energy-efficient and energy saving and environmental protection。

Environmentally friendly indoor heating furnacethe product looks beautiful.，at the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.。