Introduction to Multi tube bright heat treatment furnace, how much is the price of the forging furnace?

Multi tube bright heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a Multi tube bright heat treatment furnace，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，it has the functions of temper, quench, Forging heating, Casting heating and heat treatment，is an advanced Multi tube bright heat treatment furnace developed by our company in combination with the actual situation of the industry。The following is to introduce the Multi tube bright heat treatment furnace:

1、Brief introduction of Multi tube bright heat treatment furnace

Multi tube bright heat treatment furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Commonly used inEnergy conservation and environmental protection,Improve production efficiency,Metal melting and casting,Metal forging heating,Metal tempering and so on，it is widely used inshipping,electron,pharmacy,chemical industry,surface treatment and other industries，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the product looks beautiful.。

Multi tube bright heat treatment furnace

2、Multi tube bright heat treatment furnace real beat

The panoramic shooting of One-combustion energy saving Multi tube bright heat treatment furnace is shown as follows.。

Multi tube bright heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Introduction of Multi tube bright heat treatment furnace characteristics

Multi tube bright heat treatment furnace has the following characteristics

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Multi tube bright heat treatment furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Efficient heating

The Multi tube bright heat treatment furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Stable and reliable

The Multi tube bright heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to control

The combustion system and ventilation system of the Multi tube bright heat treatment furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Multi tube bright heat treatment furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Multi tube bright heat treatment furnace

4、Structural advantages of Multi tube bright heat treatment furnace

The Multi tube bright heat treatment furnace has the following structure

1. Radiation chamber

The heat load of the main place for Multi tube bright heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. Radiation chamber

The heat load of the main place for Multi tube bright heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. furnace chamber

A space for holding metallic materials for heating.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Multi tube bright heat treatment furnace

5、Multi tube bright heat treatment furnace price concessions

The Multi tube bright heat treatment furnace price is introduced as follows:

1. Manufacturer's sales model

If there is no middleman to earn the difference, then the Multi tube bright heat treatment furnace price will naturally decrease. One-combustion energy saving adopts the business model of "self-production and self-marketing" to sell products, thus realizing "one-on-one" sales, so the comprehensive price of our products is relatively high.

2. quality

Quality is the key factor to determine the price. A high-quality product requires a lot of manpower, material resources and raw materials, so the manufacturing cost of the product is high. Therefore, the price of high-quality products is high. On the contrary, the price of Multi tube bright heat treatment furnace is low.

3. company strength

Although there are many manufacturers of products in Jinan, Shandong province, there are certain differences in the scale and strength of each manufacturer. Some manufacturers are large in scale and strength, some are small in scale, and some manufacturers do not have their own production workshops and belong to middlemen. Relatively speaking, the prices of products formulated by middlemen are higher.

4. Configuration difference

The difference in Multi tube bright heat treatment furnace configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

5. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Multi tube bright heat treatment furnace have more or less differences in price.

Multi tube bright heat treatment furnace

6、Company selection

Choosing a suitable Multi tube bright heat treatment furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Multi tube bright heat treatment furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Multi tube bright heat treatment furnaceUniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，the main features are energy-efficient, Easy to maintain, Stable and reliable, Strong adaptability and Easy to maintain，is a popular Multi tube bright heat treatment furnace。