Introduction to Multi tube continuous bright annealing furnace, advantages, characteristics and principles of Forging furnace

Multi tube continuous bright annealing furnaceIt is a forging heating device using gas as fuel.，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，at work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

1、Brief introduction of Multi tube continuous bright annealing furnace

Multi tube continuous bright annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it can be used in aerospace, shipping, war industry, metallurgy, pharmacy and other industries，Widely used in Metal heat treatment, Metal forging heating, Metal melting and casting, Energy conservation and environmental protection and Metal heat treatment，it is an ideal choice for customers to buy Multi tube continuous bright annealing furnace。

Multi tube continuous bright annealing furnace

2、Advantages of Multi tube continuous bright annealing furnace principle

Multi tube continuous bright annealing furnaceat work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，multifunctional, with functions such as anneal, quench, anneal, heat treatment and hardening and tempering，widely used inpetroleum,electron,aerospace,Machinery manufacturing,heat treatment and other industries，It is a product series that integrates Improve production efficiency, Metal tempering, Improve production efficiency, Metal tempering and Metal heat treatment，be loved by our customers.。

Multi tube continuous bright annealing furnace

3、Multi tube continuous bright annealing furnace function

Multi tube continuous bright annealing furnaceit has the functions of normalizing, temper, Forging heating, Casting heating and quench，is a common Multi tube continuous bright annealing furnace，Mainly used forEnergy conservation and environmental protection,Metal melting and casting,Metal forging heating,Improve production efficiency andMetal melting and casting，it has the characteristics of Strong adaptability, energy saving and environmental protection, Stable and reliable, Easy to control and energy-efficient，modern technology，favorable price。

Multi tube continuous bright annealing furnace

4、Multi tube continuous bright annealing furnace application

Multi tube continuous bright annealing furnaces have the following purposes.

1. Improve production efficiency

The Multi tube continuous bright annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Improve production efficiency

The Multi tube continuous bright annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Multi tube continuous bright annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Multi tube continuous bright annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal tempering

By properly heating and cooling the metal material, the Multi tube continuous bright annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Multi tube continuous bright annealing furnace

5、Introduction of advantages of Multi tube continuous bright annealing furnace

Multi tube continuous bright annealing furnaces have the following advantages.

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the Multi tube continuous bright annealing furnace can significantly reduce energy consumption, thus reducing operating costs.

2. easy to operate

The operation interface of the Multi tube continuous bright annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Efficient combustion

The Multi tube continuous bright annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Multi tube continuous bright annealing furnace can significantly reduce energy consumption, thus reducing operating costs.

5. easy to operate

The operation interface of the Multi tube continuous bright annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Multi tube continuous bright annealing furnace

6、Multi tube continuous bright annealing furnace price advantage

The Multi tube continuous bright annealing furnace price is introduced as follows:

1. market

Generally, when the supply of Multi tube continuous bright annealing furnace exceeds the demand in the market, the product price will naturally decrease, on the contrary, the product price will increase.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Multi tube continuous bright annealing furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Multi tube continuous bright annealing furnace price can meet the purchasing needs of customers.

4. Parameter size

The prices of products with different specifications and models will definitely be different. Generally speaking, the larger the specifications and models, the higher the prices will be. Because the raw materials and time consumed in the manufacturing process of large-sized products are more, the prices are much higher than those of small-sized products.

5. technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

Multi tube continuous bright annealing furnace

Multi tube continuous bright annealing furnacethe product looks atmospheric.，it is widely used in building materials, light industry, automobile, machinery, Household necessities and other industries。