Introduction to Large scale tubular annealing furnace, advantages, characteristics and principles of heating furnace

Large scale tubular annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。The following is to introduce the Large scale tubular annealing furnace:

1、Brief introduction of Large scale tubular annealing furnace

Large scale tubular annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it has the functions of normalizing, hardening and tempering, normalizing, Casting heating and temper。

Large scale tubular annealing furnace

2、Video analysis of Large scale tubular annealing furnace

The following is the live video of Large scale tubular annealing furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved. of One-combustion energy savingproduction-manufacturing的Large scale tubular annealing furnace.。

Large scale tubular annealing furnace

As you can see from the live video.，One-combustion energy saving Widely used inImprove production efficiency,Metal forging heating,Energy conservation and environmental protection,Metal tempering,Metal melting and casting and so on。

3、Large scale tubular annealing furnace characteristics

The Large scale tubular annealing furnace features are as follows:

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Strong adaptability

The Large scale tubular annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Stable and reliable

The Large scale tubular annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Strong adaptability

The Large scale tubular annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Easy to maintain

The structural design of the Large scale tubular annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Large scale tubular annealing furnace

4、Large scale tubular annealing furnace use

The purpose of Large scale tubular annealing furnace is introduced as follows:

1. Energy conservation and environmental protection

The Large scale tubular annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal tempering

By properly heating and cooling the metal material, the Large scale tubular annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Improve production efficiency

The Large scale tubular annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Energy conservation and environmental protection

The Large scale tubular annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Improve production efficiency

The Large scale tubular annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Large scale tubular annealing furnace

5、Structural characteristics of Large scale tubular annealing furnace

The Large scale tubular annealing furnace has the following structure

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. furnace chamber

A space for holding metallic materials for heating.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Large scale tubular annealing furnace

Large scale tubular annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Simple structure and advanced technology.，it is mainly composed of convection chamber, ventilation system, furnace chamber, Radiation chamber and recovery of waste heat，it is mainly composed of ventilation system, combustor, convection chamber, combustor and recovery of waste heat，This Large scale tubular annealing furnaceThe overall structural design is relatively simple。