Introduction to Gas through heating furnace, advantages, characteristics and principles of Forging furnace

Gas through heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，The overall structural design is simple, diverse and beautiful.，Structure consists of recovery of waste heat, combustor, ventilation system, recovery of waste heat, Radiation chamber and so on，it has the functions of temper, heat treatment, Forging heating, temper and anneal，it is an ideal choice for customers to buy Gas through heating furnace。The following is to introduce the Gas through heating furnace:

1、Brief introduction of Gas through heating furnace

Gas through heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，It is a product series that integrates Energy conservation and environmental protection, Improve production efficiency, Metal forging heating, Metal tempering and Energy conservation and environmental protection，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，is designed by One-combustion energy saving with advanced technology。

Gas through heating furnace

2、Gas through heating furnace structure composition

The Gas through heating furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. Radiation chamber

The heat load of the main place for Gas through heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Gas through heating furnace

3、Gas through heating furnace function

Gas through heating furnaceit has the functions of normalizing, Casting heating, heat treatment, Forging heating and hardening and tempering，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Gas through heating furnace

4、Gas through heating furnace use

The purpose of Gas through heating furnace is introduced as follows:

1. Metal forging heating

The Gas through heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal tempering

By properly heating and cooling the metal material, the Gas through heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Gas through heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The Gas through heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Improve production efficiency

The Gas through heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Gas through heating furnace

5、Gas through heating furnace explanation video

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Gas through heating furnacet operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Gas through heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the main structure includes convection chamber, ventilation system, furnace chamber, recovery of waste heat, Radiation chamber and so on，Gas through heating furnaceThe overall structural design is relatively simple。

6、Gas through heating furnace price

The Gas through heating furnace price is introduced as follows:

1. Configuration level

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Gas through heating furnace, which is beyond doubt. One-combustion energy saving makes every product with great care in the attitude of being highly responsible to customers, so the price of One-combustion energy saving Gas through heating furnace is reasonable for products with the same configuration.

2. select a qualified person

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

3. Brand strength

At present, there are various brands of Gas through heating furnace in Jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Gas through heating furnace are different.

4. Company size

Our factory is a direct selling manufacturer of Gas through heating furnace, with independent production and processing facilities, few circulation links and low circulation cost.

5. Less intermediate links

One-combustion energy saving has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

Gas through heating furnace

Gas through heating furnaceis a kind of high quality and low price Gas through heating furnace，Widely used inMetal heat treatment,Metal melting and casting,Improve production efficiency,Metal forging heating,Metal melting and casting and so on，it is widely used in pharmacy, building materials, Household necessities, war industry and shipping。