What is a Regenerative gas through furnace? How much is the price of the heating furnace?

Regenerative gas through furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a kind of high quality and low price Regenerative gas through furnace，the product looks beautiful.。

1、Brief introduction of Regenerative gas through furnace

Regenerative gas through furnaceIt is a forging heating device using gas as fuel.，the principle is simple.The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it is an ideal choice for customers to buy Regenerative gas through furnace。

Regenerative gas through furnace

2、Regenerative gas through furnace structure composition

The Regenerative gas through furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Radiation chamber

The heat load of the main place for Regenerative gas through furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. furnace chamber

A space for holding metallic materials for heating.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Regenerative gas through furnace

3、Regenerative gas through furnace characteristics

The Regenerative gas through furnace features are as follows:

1. Strong adaptability

The Regenerative gas through furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Easy to control

The combustion system and ventilation system of the Regenerative gas through furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Efficient heating

The Regenerative gas through furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Regenerative gas through furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

5. Easy to maintain

The structural design of the Regenerative gas through furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Regenerative gas through furnace

4、Regenerative gas through furnace video live broadcast

You can buy Regenerative gas through furnace according to your needs and show you Regenerative gas through furnace videos.。

Regenerative gas through furnace

As you can see from the live video.，One-combustion energy saving the product looks atmospheric.。

5、Regenerative gas through furnace HD real picture

Overview of high-definition pictures,the product looks atmospheric., different specifications and models。

Regenerative gas through furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Company selection

Choosing a suitable Regenerative gas through furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Regenerative gas through furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Regenerative gas through furnaceit is widely used inshipping,metallurgy,heat treatment,pharmacy,machinery and other industries，It is mostly used in Energy conservation and environmental protection, Metal tempering, Metal melting and casting, Improve production efficiency, Metal heat treatment, Metal heat treatment and so on。