What is a Automatic temperature control through furnace? Introduction to the advantages, characteristics, and principles of the Forging furnace

Automatic temperature control through furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，customizable。The following is to introduce the Automatic temperature control through furnace:

1、Brief introduction of Automatic temperature control through furnace

Automatic temperature control through furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，at runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

Automatic temperature control through furnace

2、Automatic temperature control through furnace principle

Automatic temperature control through furnaceHeat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，is based on One-combustion energy saving is a kind of Automatic temperature control through furnace manufactured by One-combustion energy saving。

Automatic temperature control through furnace

3、Automatic temperature control through furnace function

Automatic temperature control through furnaceit has the functions of temper, heat treatment, Forging heating, normalizing and Casting heating，it is mainly composed of furnace chamber, recovery of waste heat, combustor, ventilation system and Radiation chamber，is carefully developed by One-combustion energy saving combined with advanced technology。

Automatic temperature control through furnace

4、Automatic temperature control through furnace display

One-combustion energy saving Automatic temperature control through furnace HD picture, panoramic shooting。

Automatic temperature control through furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Introduction of Automatic temperature control through furnace characteristics

Automatic temperature control through furnace has the following characteristics

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Automatic temperature control through furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Easy to maintain

The structural design of the Automatic temperature control through furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Automatic temperature control through furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

5. Efficient heating

The Automatic temperature control through furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

Automatic temperature control through furnace

6、Automatic temperature control through furnace structure composition

The Automatic temperature control through furnace has the following structure

1. Radiation chamber

The heat load of the main place for Automatic temperature control through furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Automatic temperature control through furnace

Automatic temperature control through furnaceSimple structure and advanced technology.，it has the structure of furnace chamber, Radiation chamber, convection chamber, ventilation system and Radiation chamber，is a kind of high quality and low price Automatic temperature control through furnace，It has a wide range of uses, including Metal tempering, Metal heat treatment, Metal forging heating, Metal melting and casting and Energy conservation and environmental protection。