What is a Quenching gas trolley furnace? Introduction to the advantages, characteristics, and principles of the forging furnace

Quenching gas trolley furnaceIt is a forging heating device using gas as fuel.，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，features include Stable and reliable, Easy to control, energy-efficient, Stable and reliable and Easy to control，was developed and designed by One-combustion energy saving。

1、Brief introduction of Quenching gas trolley furnace

Quenching gas trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Quenching gas trolley furnace

2、Functional advantages of Quenching gas trolley furnace

Quenching gas trolley furnaces have the following advantages.

1. Extend the service life of equipment

The Quenching gas trolley furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. easy to operate

The operation interface of the Quenching gas trolley furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Quenching gas trolley furnace can significantly reduce energy consumption, thus reducing operating costs.

4. Multiple fuel options

Although the Quenching gas trolley furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Improve product quality

Because the Quenching gas trolley furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Quenching gas trolley furnace

3、Quenching gas trolley furnace function

Quenching gas trolley furnacemultifunctional, with functions such as temper, quench, anneal, heat treatment and Casting heating，is a kind of high quality and low price Quenching gas trolley furnace，It has a wide range of uses, and is often used inEnergy conservation and environmental protection,Improve production efficiency,Metal forging heating,Metal tempering,Energy conservation and environmental protection and so on，Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，the product looks beautiful.。

Quenching gas trolley furnace

4、Advantages of Quenching gas trolley furnace principle

Quenching gas trolley furnaceat runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it has the functions of normalizing, hardening and tempering, temper, Forging heating and temper，the main features are Easy to maintain, Strong adaptability, energy saving and environmental protection, energy saving and environmental protection and Stable and reliable，Simple structure and advanced technology.，it is mainly composed of combustor, recovery of waste heat, combustor, Radiation chamber and ventilation system，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

Quenching gas trolley furnace

5、Quenching gas trolley furnace price advantage

The Quenching gas trolley furnace price is introduced as follows:

1. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Quenching gas trolley furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Quenching gas trolley furnace price can meet the purchasing needs of customers.

2. Manufacturer scale

Direct selling by manufacturers and sales by middlemen will also affect product prices. There are not too many links among direct selling products, so the cost required by manufacturers is low, and the price of Quenching gas trolley furnace is low. Customers can also put products into production in advance. On the contrary, when purchasing products from middlemen, there are not only many links, but also the price of Quenching gas trolley furnace is much higher, so customers should choose products directly sold by manufacturers when purchasing.

3. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Quenching gas trolley furnace have more or less differences in price.

4. product quality

The quality of the Quenching gas trolley furnace is the key factor that affects its price. The manufacturer of high-quality products has high cost in production and high product performance, which can bring higher economic benefits to customers. Because the manufacturer of high-quality products has high production investment, the manufacturer is on the high side when positioning the Quenching gas trolley furnace price.

5. market supply and demand

The market has great fluctuation, which is also the key factor that leads to the imbalance and instability of supply and demand, and then leads to great changes in product prices. Only after a comprehensive understanding and investigation of the market can we make a reasonable decision, and then we can formulate a Quenching gas trolley furnace price sales plan that customers are satisfied with, and the main reason for its price rationality is also reflected here.

Quenching gas trolley furnace

6、One-combustion energy saving's strength

The company has many years of Quenching gas trolley furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Quenching gas trolley furnaceis a popular Quenching gas trolley furnace，in the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，Structure consists of ventilation system, Radiation chamber, recovery of waste heat, ventilation system, furnace chamber and so on，productThe structural design is simple, novel and special.。