Introduction to Automatic trolley heating furnace, heating furnace specifications, model parameters

Automatic trolley heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，support customization。The following is to introduce the Automatic trolley heating furnace:

1、Brief introduction of Automatic trolley heating furnace

Automatic trolley heating furnaceIt is a forging heating device using gas as fuel.，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it has been widely used in metallurgy, automobile, chemical industry, electron, heat treatment and other industries，multifunctional, with functions such as Forging heating, hardening and tempering, quench, Casting heating and normalizing，The overall structural design is relatively simple，the main structure includes Radiation chamber, ventilation system, furnace chamber, recovery of waste heat, convection chamber and so on。

Automatic trolley heating furnace

2、Automatic trolley heating furnace performance advantage

Automatic trolley heating furnaces have the following advantages.

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the Automatic trolley heating furnace can significantly reduce energy consumption, thus reducing operating costs.

2. Intelligent control

The Automatic trolley heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Extend the service life of equipment

The Automatic trolley heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Efficient combustion

The Automatic trolley heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Improve product quality

Because the Automatic trolley heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Automatic trolley heating furnace

3、Automatic trolley heating furnace function

Automatic trolley heating furnaceit has the functions of hardening and tempering, anneal, Forging heating, heat treatment and temper，it is an ideal choice for customers to buy Automatic trolley heating furnace。

Automatic trolley heating furnace

4、Structural characteristics of Automatic trolley heating furnace

The Automatic trolley heating furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Radiation chamber

The heat load of the main place for Automatic trolley heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Automatic trolley heating furnace

5、Automatic trolley heating furnace application

Automatic trolley heating furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Automatic trolley heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Automatic trolley heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal forging heating

The Automatic trolley heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Improve production efficiency

The Automatic trolley heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal heat treatment

In addition to forging heating, Automatic trolley heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Automatic trolley heating furnace

6、Automatic trolley heating furnace price consultation

The Automatic trolley heating furnace price is introduced as follows:

1. Self quality

The Automatic trolley heating furnace is made of high-quality materials, and the cost of the product is high, so the price of the product will also rise. One-combustion energy saving has always adhered to high quality in the construction of Automatic trolley heating furnace and won the trust of customers.

2. specifications and models

Different customers need different output, different specifications, different product configurations, and their Automatic trolley heating furnace prices are also different. The bigger the specification, the stronger the performance of the product and the higher the quotation.

3. marketing channel

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

4. Different regions

The price of Automatic trolley heating furnace in Shandong(Province) is much lower than that in other regions, and One-combustion energy saving is a large-scale Manufacturer and seller integrating production and sales not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Automatic trolley heating furnace price positioning more reasonable, low-cost and economical.

5. market quotation

Market change is the main factor that affects the price level. Because of the instability and uncertainty of the market, the sales price of Automatic trolley heating furnace will fluctuate greatly, and the market changes are various.

Automatic trolley heating furnace

Automatic trolley heating furnacefeatures include Stable and reliable, energy-efficient, energy saving and environmental protection, Easy to maintain and energy-efficient，the principle is simple.The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，Structure consists of Radiation chamber, ventilation system, recovery of waste heat, combustor, furnace chamber and so on。