What is a Split type trolley forging heating furnace? How much is the price of the Forging furnace?

Split type trolley forging heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，Structure consists of combustor, convection chamber, combustor, Radiation chamber, recovery of waste heat and so on，low in price。

1、Brief introduction of Split type trolley forging heating furnace

Split type trolley forging heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Split type trolley forging heating furnace

2、Introduction of advantages of Split type trolley forging heating furnace

The advantages of Split type trolley forging heating furnace are as follows:

1. Intelligent control

The Split type trolley forging heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Improve product quality

Because the Split type trolley forging heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. easy to operate

The operation interface of the Split type trolley forging heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Improve product quality

Because the Split type trolley forging heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Split type trolley forging heating furnace

3、Split type trolley forging heating furnace characteristics

The Split type trolley forging heating furnace features are as follows:

1. Stable and reliable

The Split type trolley forging heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Efficient heating

The Split type trolley forging heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Split type trolley forging heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Split type trolley forging heating furnace

4、Split type trolley forging heating furnace structure composition

The Split type trolley forging heating furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. furnace chamber

A space for holding metallic materials for heating.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. Radiation chamber

The heat load of the main place for Split type trolley forging heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Split type trolley forging heating furnace

5、How much is the Split type trolley forging heating furnace?

The Split type trolley forging heating furnace price is introduced as follows:

1. Product configuration difference

Usually, the quotation of Split type trolley forging heating furnace changes with its configuration, but the quotation is different according to the different needs of customers and different product configurations.

2. regional advantages

The price of Split type trolley forging heating furnace in Jinan, Shandong province is much lower than that in other regions, and One-combustion energy saving is a professional Split type trolley forging heating furnaceproduction center in Shandong(Province) not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Split type trolley forging heating furnace price positioning more reasonable, low-cost and economical.

3. Reasonable sales model

What kind of sales methods manufacturers have has an intuitive impact on product prices. If it is a direct selling manufacturer, the manufacturer sells directly to customers, and there is no intermediate price difference, which can benefit customers to a greater extent.

4. raw material

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

5. mass discrepancy

Quality generally refers to the quality of the product. The better the quality, the higher the quality of the product. Because the quality is directly proportional to the cost of the product, the price of the Split type trolley forging heating furnace will vary greatly. One-combustion energy saving attaches great importance to the quality of products, and the formulation of prices is also reasonable.

Split type trolley forging heating furnace

6、One-combustion energy saving company discount

Split type trolley forging heating furnace is a new type of Forging furnace introduced by One-combustion energy saving manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for war industry and other industries. Now consult One-combustion energy savingproduce的Split type trolley forging heating furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Split type trolley forging heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a common Split type trolley forging heating furnace。