What is a Split type natural gas trolley furnace? Introduction to the principle of heating furnace structure

Split type natural gas trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the product looks beautiful.，it has the characteristics of energy-efficient, Stable and reliable, energy saving and environmental protection, Strong adaptability and Easy to maintain，is a Split type natural gas trolley furnace，customizable。The following is to introduce the Split type natural gas trolley furnace:

1、Brief introduction of Split type natural gas trolley furnace

Split type natural gas trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，usually used in heat treatment, electron, Machinery manufacturing, aerospace, pharmacy and other fields，is based on One-combustion energy saving is carefully developed by One-combustion energy saving combined with advanced technology。

Split type natural gas trolley furnace

2、Split type natural gas trolley furnace function

Split type natural gas trolley furnaceit has the functions of temper, anneal, normalizing, heat treatment and Casting heating，Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，it is widely used inmachinery,material,aerospace,metallurgy,building materials and other industries，It is mostly used in Improve production efficiency, Energy conservation and environmental protection, Improve production efficiency, Metal heat treatment, Metal tempering, Energy conservation and environmental protection and so on，at the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。

Split type natural gas trolley furnace

3、Split type natural gas trolley furnace use

The purpose of Split type natural gas trolley furnace is introduced as follows:

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Split type natural gas trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal forging heating

The Split type natural gas trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Energy conservation and environmental protection

The Split type natural gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Energy conservation and environmental protection

The Split type natural gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal tempering

By properly heating and cooling the metal material, the Split type natural gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Split type natural gas trolley furnace

4、Introduction of Split type natural gas trolley furnace characteristics

Split type natural gas trolley furnace has the following characteristics

1. Strong adaptability

The Split type natural gas trolley furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Stable and reliable

The Split type natural gas trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Easy to maintain

The structural design of the Split type natural gas trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Efficient heating

The Split type natural gas trolley furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Easy to maintain

The structural design of the Split type natural gas trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Split type natural gas trolley furnace

5、Split type natural gas trolley furnace introduction video

On-site aerial photography of Split type natural gas trolley furnace。

Split type natural gas trolley furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd is a common Split type natural gas trolley furnace。

Split type natural gas trolley furnaceThe structural design is simple, novel and special.，structure mainly includes: ventilation system, ventilation system, furnace chamber, ventilation system, Radiation chamber and so on，It has the functions of Improve production efficiency, Metal melting and casting, Metal heat treatment, Metal tempering and Metal forging heating，at runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。