Yiran178-6053-1222

Introduction to Circulating trolley furnace, introduction to Forging furnace advantages and characteristics

2025-5-27

Circulating trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.,is an advanced Circulating trolley furnace developed by our company in combination with the actual situation of the industry。The following is to introduce the Circulating trolley furnace:

1、Brief introduction of Circulating trolley furnace

Circulating trolley furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.,Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.,It has a wide range of uses, and is often used inMetal melting and casting,Metal tempering,Improve production efficiency,Metal forging heating,Metal melting and casting and so on,it is an ideal choice for customers to buy Circulating trolley furnace。

Circulating trolley furnace

Circulating trolley furnace

2、Circulating trolley furnace use

The purpose of Circulating trolley furnace is introduced as follows:

  1. Improve production efficiency
  2. The Circulating trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

  3. Metal heat treatment
  4. In addition to forging heating, Circulating trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

  5. Energy conservation and environmental protection
  6. The Circulating trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

  7. Metal tempering
  8. By properly heating and cooling the metal material, the Circulating trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

  9. Metal heat treatment
  10. In addition to forging heating, Circulating trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Circulating trolley furnace

Circulating trolley furnace

3、Advantages of Circulating trolley furnace principle

Circulating trolley furnaceat runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.,is a common Circulating trolley furnace,be loved by our customers.。

Circulating trolley furnace

Circulating trolley furnace

4、Circulating trolley furnace function

Circulating trolley furnacemultifunctional, with functions such as anneal, heat treatment, Casting heating, hardening and tempering and temper,is a kind of Circulating trolley furnace manufactured by One-combustion energy saving。

Circulating trolley furnace

Circulating trolley furnace

5、Circulating trolley furnace characteristics

The Circulating trolley furnace features are as follows:

  1. Easy to control
  2. By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

  3. Efficient heating
  4. The Circulating trolley furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

  5. Strong adaptability
  6. The Circulating trolley furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

  7. Strong adaptability
  8. The Circulating trolley furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

  9. Easy to maintain
  10. The structural design of the Circulating trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Circulating trolley furnace

Circulating trolley furnace

6、Circulating trolley furnace price

The Circulating trolley furnace price is introduced as follows:

  1. Different regions
  2. One-combustion energy saving has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for Circulating trolley furnace.

  3. region
  4. Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. One-combustion energy saving detailed address:Zhangqiu Niu Yi Industrial Park, Ji 'nan City, Shandong Province, where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

  5. manufacturing cost
  6. When the Circulating trolley furnace is manufactured, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

  7. Model size
  8. There are various specifications and models of Circulating trolley furnace, and the performance of different specifications and models is quite different. Customers should choose products with appropriate specifications and models according to the actual situation.

  9. product function
  10. The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Circulating trolley furnace

Circulating trolley furnace

Circulating trolley furnaceIt is mostly used in Metal tempering, Metal heat treatment, Metal forging heating, Improve production efficiency, Energy conservation and environmental protection, Metal melting and casting and so on,Strong adaptability,Easy to maintain,Strong adaptability,Stable and reliable,energy saving and environmental protection,widely used in petroleum, light industry, chemical industry, heat treatment, Household necessities and other fields。