What is a Regenerative natural gas trolley forging furnace? Introduction to the principle of heating furnace structure

Regenerative natural gas trolley forging furnaceIt is a forging heating device using gas as fuel.，it has been widely used in aerospace, petroleum, material, electron, Machinery manufacturing and other industries，It is mostly used in Energy conservation and environmental protection, Metal heat treatment, Metal heat treatment, Metal melting and casting, Improve production efficiency, Metal tempering and so on，it has the characteristics of energy-efficient, Strong adaptability, Easy to control, energy saving and environmental protection and Stable and reliable，is a kind of high quality and low price Regenerative natural gas trolley forging furnace。

1、Brief introduction of Regenerative natural gas trolley forging furnace

Regenerative natural gas trolley forging furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，can be customized according to user's needs.。

Regenerative natural gas trolley forging furnace

2、Regenerative natural gas trolley forging furnace structure composition

The Regenerative natural gas trolley forging furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

Regenerative natural gas trolley forging furnace

3、Introduction of Regenerative natural gas trolley forging furnace characteristics

Regenerative natural gas trolley forging furnace has the following characteristics

1. Stable and reliable

The Regenerative natural gas trolley forging furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to control

The combustion system and ventilation system of the Regenerative natural gas trolley forging furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Regenerative natural gas trolley forging furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Efficient heating

The Regenerative natural gas trolley forging furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Stable and reliable

The Regenerative natural gas trolley forging furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Regenerative natural gas trolley forging furnace

4、Regenerative natural gas trolley forging furnace characteristics

The Regenerative natural gas trolley forging furnace features are as follows:

1. Strong adaptability

The Regenerative natural gas trolley forging furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. Easy to maintain

The structural design of the Regenerative natural gas trolley forging furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Easy to control

The combustion system and ventilation system of the Regenerative natural gas trolley forging furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Strong adaptability

The Regenerative natural gas trolley forging furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Efficient heating

The Regenerative natural gas trolley forging furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

Regenerative natural gas trolley forging furnace

5、Working principle of Regenerative natural gas trolley forging furnace

Regenerative natural gas trolley forging furnaceat work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，features include Strong adaptability, Easy to control, Easy to maintain, energy-efficient and Strong adaptability，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，be of high quality，The price is relatively low.。

Regenerative natural gas trolley forging furnace

6、Regenerative natural gas trolley forging furnace quotation

The Regenerative natural gas trolley forging furnace price is introduced as follows:

1. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Regenerative natural gas trolley forging furnace have more or less differences in price.

2. technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

3. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

4. Proper management mode

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of Regenerative natural gas trolley forging furnace is low.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Regenerative natural gas trolley forging furnace

Regenerative natural gas trolley forging furnaceis a Regenerative natural gas trolley forging furnace，it can be used in building materials, light industry, heat treatment, pharmacy, metallurgy and other industries。