What is a Continuous heat treatment heating furnace? Introduction to the advantages, characteristics, and principles of the forging furnace

Continuous heat treatment heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.。The following is to introduce the Continuous heat treatment heating furnace:

1、Brief introduction of Continuous heat treatment heating furnace

Continuous heat treatment heating furnaceIt is a forging heating device using gas as fuel.，It is mostly used in Metal tempering, Metal melting and casting, Energy conservation and environmental protection, Metal forging heating, Metal heat treatment, Energy conservation and environmental protection and so on，at the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the main structure includes ventilation system, convection chamber, combustor, ventilation system, Radiation chamber and so on，it has the functions of heat treatment, normalizing, hardening and tempering, Casting heating and temper。

Continuous heat treatment heating furnace

2、Structural characteristics of Continuous heat treatment heating furnace

The Continuous heat treatment heating furnace has the following structure

1. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Continuous heat treatment heating furnace

3、Continuous heat treatment heating furnace function

Continuous heat treatment heating furnacemultifunctional, with functions such as heat treatment, anneal, quench, Casting heating and Forging heating，it is widely used in war industry, shipping, aerospace, Machinery manufacturing and heat treatment，Stable and reliable,energy-efficient,Easy to maintain,Stable and reliable,energy saving and environmental protection，the main structure includes recovery of waste heat, furnace chamber, Radiation chamber, ventilation system and recovery of waste heat，productSimple structure and reliable operation.，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。

Continuous heat treatment heating furnace

4、Continuous heat treatment heating furnace use

The purpose of Continuous heat treatment heating furnace is introduced as follows:

1. Energy conservation and environmental protection

The Continuous heat treatment heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Improve production efficiency

The Continuous heat treatment heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal forging heating

The Continuous heat treatment heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Continuous heat treatment heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Energy conservation and environmental protection

The Continuous heat treatment heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Continuous heat treatment heating furnace

5、Continuous heat treatment heating furnace quotation

The Continuous heat treatment heating furnace price is introduced as follows:

1. marketing channel

One-combustion energy saving has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

2. Model type

Customer needs are different, so the required product models will be different. Different product models and different performances will naturally lead to different Continuous heat treatment heating furnace prices.

3. mass discrepancy

The higher the quality of the product, the longer its service life will be, and such products can create more amazing economic value for customers as much as possible. At the same time, customers are quite fond of such products, and One-combustion energy saving's product quality is guaranteed and the price is cost-effective.

4. market competition

Market change is the main factor that affects the price level. Because of the instability and uncertainty of the market, the sales price of Continuous heat treatment heating furnace will fluctuate greatly, and the market changes are various.

5. technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

Continuous heat treatment heating furnace

6、company strength

The company has many years of Continuous heat treatment heating furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Continuous heat treatment heating furnaceIt has the functions of Metal tempering, Metal melting and casting, Improve production efficiency, Metal forging heating and Metal tempering，the main features are energy-efficient, Strong adaptability, Easy to control, energy saving and environmental protection and Easy to maintain，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.。