What is a Natural gas regenerative trolley furnace? heating furnace specifications, models, and parameters

Natural gas regenerative trolley furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，multifunctional, with functions such as normalizing, Forging heating, hardening and tempering, temper and quench。The following is to introduce the Natural gas regenerative trolley furnace:

1、Brief introduction of Natural gas regenerative trolley furnace

Natural gas regenerative trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it has been widely used in building materials, light industry, Machinery manufacturing, pharmacy, chemical industry and other industries，it is an ideal choice for customers to buy Natural gas regenerative trolley furnace。

Natural gas regenerative trolley furnace

2、Natural gas regenerative trolley furnace function

Natural gas regenerative trolley furnaceit has the functions of anneal, hardening and tempering, Forging heating, quench and Casting heating，be of high quality。

Natural gas regenerative trolley furnace

3、Structural advantages of Natural gas regenerative trolley furnace

The Natural gas regenerative trolley furnace has the following structure

1. Radiation chamber

The heat load of the main place for Natural gas regenerative trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Natural gas regenerative trolley furnace

4、Natural gas regenerative trolley furnace use

The purpose of Natural gas regenerative trolley furnace is introduced as follows:

1. Metal forging heating

The Natural gas regenerative trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal heat treatment

In addition to forging heating, Natural gas regenerative trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Energy conservation and environmental protection

The Natural gas regenerative trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal tempering

By properly heating and cooling the metal material, the Natural gas regenerative trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Natural gas regenerative trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Natural gas regenerative trolley furnace

5、Natural gas regenerative trolley furnace price consultation

The Natural gas regenerative trolley furnace price is introduced as follows:

1. select a qualified person

The quality of material selection is one of the main factors that directly affect the Natural gas regenerative trolley furnace. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

2. Configuration difference

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Natural gas regenerative trolley furnace has a higher cost performance.

3. Model type

There are various specifications and models of Natural gas regenerative trolley furnace, and the performance of different specifications and models is quite different. Customers should choose products with appropriate specifications and models according to the actual situation.

4. Different regions

If the location of the manufacturer is superior, its transportation will be more convenient. One-combustion energy saving located in Jinan. has convenient transportation, which provides a good convenience for the transportation of Natural gas regenerative trolley furnace.

5. cost of production

The cost of manufacturing Natural gas regenerative trolley furnace varies from manufacturer to manufacturer. The higher the cost of manufacturing products, the higher the product price will be. On the other hand, the lower the production cost, the lower the product price, but the quality of products with high production cost is guaranteed, which can reduce the maintenance cost of customers.

Natural gas regenerative trolley furnace

6、company strength

The company has many years of Natural gas regenerative trolley furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Natural gas regenerative trolley furnaceit has the characteristics of Stable and reliable, Strong adaptability, energy-efficient, Easy to control and energy saving and environmental protection，It can be used for Metal tempering, Energy conservation and environmental protection, Improve production efficiency, Energy conservation and environmental protection, Improve production efficiency, Metal forging heating and so on，is a popular Natural gas regenerative trolley furnace。