Introduction to Regenerative burner walking furnace, Forging furnace advantages, characteristics and principles

Regenerative burner walking furnaceIt is a forging heating device using gas as fuel.，the advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，is an advanced Regenerative burner walking furnace developed by our company in combination with the actual situation of the industry。

1、Brief introduction of Regenerative burner walking furnace

Regenerative burner walking furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it is an ideal choice for customers to buy Regenerative burner walking furnace。

Regenerative burner walking furnace

2、Regenerative burner walking furnace characteristics

The Regenerative burner walking furnace features are as follows:

1. Efficient heating

The Regenerative burner walking furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Regenerative burner walking furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

3. Easy to maintain

The structural design of the Regenerative burner walking furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Strong adaptability

The Regenerative burner walking furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Stable and reliable

The Regenerative burner walking furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Regenerative burner walking furnace

3、Working principle of Regenerative burner walking furnace

Regenerative burner walking furnaceat runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the product looks beautiful.，widely used in automobile, surface treatment, chemical industry, building materials, aerospace and other fields，the product looks beautiful.，it is an ideal choice for customers to buy Regenerative burner walking furnace。

Regenerative burner walking furnace

4、Regenerative burner walking furnace application

Regenerative burner walking furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative burner walking furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal tempering

By properly heating and cooling the metal material, the Regenerative burner walking furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal heat treatment

In addition to forging heating, Regenerative burner walking furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal forging heating

The Regenerative burner walking furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Improve production efficiency

The Regenerative burner walking furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Regenerative burner walking furnace

5、Regenerative burner walking furnace field real shot

The following is the live video of Regenerative burner walking furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment. of One-combustion energy savingProduction and processing的Regenerative burner walking furnace.。

Regenerative burner walking furnace

As you can see from the live video.，One-combustion energy saving at the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。

6、One-combustion energy saving's strength

The company has many years of Regenerative burner walking furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Regenerative burner walking furnaceis a common Regenerative burner walking furnace，It is mostly used in Improve production efficiency, Metal melting and casting, Metal forging heating, Metal tempering, Metal heat treatment, Improve production efficiency and so on。