Introduction to Chain belt heat treatment furnace, Forging furnace advantages, characteristics and principles

Chain belt heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it is widely used in automobile, chemical industry, machinery, surface treatment and heat treatment，was developed and designed by One-combustion energy saving。The following is to introduce the Chain belt heat treatment furnace:

1、Brief introduction of Chain belt heat treatment furnace

Chain belt heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，is a popular Chain belt heat treatment furnace，the main structure includes ventilation system, furnace chamber, ventilation system, combustor and convection chamber，This productThe structure is novel, special, advanced, reasonable and scientific.，the main features are Strong adaptability, Easy to maintain, energy saving and environmental protection, Stable and reliable and energy-efficient。

Chain belt heat treatment furnace

2、Chain belt heat treatment furnace structure composition

The Chain belt heat treatment furnace has the following structure

1. furnace chamber

A space for holding metallic materials for heating.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Radiation chamber

The heat load of the main place for Chain belt heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Chain belt heat treatment furnace

3、Chain belt heat treatment furnace HD real shot

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Chain belt heat treatment furnace production process and production site, and gain favorable comments and recognition from customers.。

Chain belt heat treatment furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It is a forging heating device using gas as fuel.。

4、Introduction of Chain belt heat treatment furnace characteristics

Chain belt heat treatment furnace has the following characteristics

1. Stable and reliable

The Chain belt heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Efficient heating

The Chain belt heat treatment furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Strong adaptability

The Chain belt heat treatment furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

5. Easy to maintain

The structural design of the Chain belt heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Chain belt heat treatment furnace

5、Working principle of Chain belt heat treatment furnace

Chain belt heat treatment furnaceat the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it has the functions of normalizing, temper, anneal, temper and quench，The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。

Chain belt heat treatment furnace

Chain belt heat treatment furnaceis a kind of high quality and low price Chain belt heat treatment furnace，it has the characteristics of Strong adaptability, Easy to control, Easy to maintain, Stable and reliable and energy saving and environmental protection，Widely used inMetal melting and casting,Metal tempering,Metal forging heating,Metal heat treatment,Improve production efficiency and so on。