Introduction to Continuous well furnace and Forging furnace working principle

Continuous well furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a common Continuous well furnace。

1、Brief introduction of Continuous well furnace

Continuous well furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is an advanced Continuous well furnace developed by our company in combination with the actual situation of the industry。

Continuous well furnace

2、Continuous well furnace picture

One-combustion energy saving Continuous well furnace manufacturers, a variety of series of Continuous well furnace with high-definition pictures at a glance, showing the product style, for the majority of users to choose at will.。

Continuous well furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Continuous well furnace principle

Continuous well furnaceat runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，super quality and competitive price。

Continuous well furnace

4、Structural advantages of Continuous well furnace

The Continuous well furnace has the following structure

1. Radiation chamber

The heat load of the main place for Continuous well furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. furnace chamber

A space for holding metallic materials for heating.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Continuous well furnace

5、Continuous well furnace price advantage

The Continuous well furnace price is introduced as follows:

1. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Continuous well furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Continuous well furnace price can meet the purchasing needs of customers.

2. market demand

The difference between the supply and demand of manufacturers and customers will also affect the Continuous well furnace price. When the demand of customers on the market increases and the supply of products by manufacturers is small, the Continuous well furnace price will increase with the increase of demand. On the contrary, when the supply of product manufacturers on the market exceeds the demand of customers, the Continuous well furnace price will decrease.

3. regional advantages

The consumption level will be different in different regions. When pricing equipment, many manufacturers often set the price according to the consumption level of the region. If the consumption level is high, the price will be correspondingly high, otherwise, the price will be very low.

4. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Continuous well furnace price and service can meet the actual needs of customers.

5. Less intermediate links

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of Continuous well furnace is low.

Continuous well furnace

6、One-combustion energy saving's strength

The company has many years of Continuous well furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Continuous well furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the product looks atmospheric.。