Introduction to Automatic temperature regulating roller bottom heating furnace, advantages, characteristics and principles of heating furnace

Automatic temperature regulating roller bottom heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，modern technology。The following is to introduce the Automatic temperature regulating roller bottom heating furnace:

1、Brief introduction of Automatic temperature regulating roller bottom heating furnace

Automatic temperature regulating roller bottom heating furnaceIt is a forging heating device using gas as fuel.。

Automatic temperature regulating roller bottom heating furnace

2、Automatic temperature regulating roller bottom heating furnace use

The purpose of Automatic temperature regulating roller bottom heating furnace is introduced as follows:

1. Energy conservation and environmental protection

The Automatic temperature regulating roller bottom heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Energy conservation and environmental protection

The Automatic temperature regulating roller bottom heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal heat treatment

In addition to forging heating, Automatic temperature regulating roller bottom heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Automatic temperature regulating roller bottom heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal tempering

By properly heating and cooling the metal material, the Automatic temperature regulating roller bottom heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Automatic temperature regulating roller bottom heating furnace

3、Automatic temperature regulating roller bottom heating furnace advantage

The advantages of Automatic temperature regulating roller bottom heating furnace are as follows:

1. Extend the service life of equipment

The Automatic temperature regulating roller bottom heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Automatic temperature regulating roller bottom heating furnace can significantly reduce energy consumption, thus reducing operating costs.

3. Improve product quality

Because the Automatic temperature regulating roller bottom heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Rapid temperature rise

The Automatic temperature regulating roller bottom heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Efficient combustion

The Automatic temperature regulating roller bottom heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Automatic temperature regulating roller bottom heating furnace

4、Automatic temperature regulating roller bottom heating furnace characteristics

The Automatic temperature regulating roller bottom heating furnace features are as follows:

1. Efficient heating

The Automatic temperature regulating roller bottom heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Automatic temperature regulating roller bottom heating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Easy to control

The combustion system and ventilation system of the Automatic temperature regulating roller bottom heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Strong adaptability

The Automatic temperature regulating roller bottom heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Stable and reliable

The Automatic temperature regulating roller bottom heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Automatic temperature regulating roller bottom heating furnace

5、Working principle of Automatic temperature regulating roller bottom heating furnace

Automatic temperature regulating roller bottom heating furnaceThe high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the product looks beautiful.。

Automatic temperature regulating roller bottom heating furnace

6、One-combustion energy saving company service

One-combustion energy saving manufacturer services include three aspects: pre-sale, in-sale and after-sale. Each stage is closely connected with each other, sincerely serving each customer, focusing on customer needs, providing customers with product knowledge training and regularly repairing products for customers, etc., which has been appreciated by new and old customers.。

One-combustion energy saving

Automatic temperature regulating roller bottom heating furnaceis a kind of high quality and low price Automatic temperature regulating roller bottom heating furnace，it is mainly composed of Radiation chamber, recovery of waste heat, convection chamber, combustor and furnace chamber，multifunctional, with functions such as hardening and tempering, heat treatment, temper, hardening and tempering and quench。