Introduction to Roll annealing furnace and Forging furnace advantages and features

Roll annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a kind of high quality and low price Roll annealing furnace，the product looks beautiful.。

1、Brief introduction of Roll annealing furnace

Roll annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Simple structure and advanced technology.，Structure consists of Radiation chamber, ventilation system, combustor, furnace chamber, ventilation system and so on，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，is designed by One-combustion energy saving with advanced technology。

Roll annealing furnace

2、Working principle of Roll annealing furnace

Roll annealing furnaceat the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

Roll annealing furnace

3、Roll annealing furnace use

The purpose of Roll annealing furnace is introduced as follows:

1. Energy conservation and environmental protection

The Roll annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Improve production efficiency

The Roll annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal forging heating

The Roll annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Energy conservation and environmental protection

The Roll annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Roll annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Roll annealing furnace

4、Roll annealing furnace characteristics

The Roll annealing furnace features are as follows:

1. Stable and reliable

The Roll annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Efficient heating

The Roll annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Easy to control

The combustion system and ventilation system of the Roll annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Roll annealing furnace

5、Roll annealing furnace HD picture

The following pictures can be used for reference by new and old customers.。

Roll annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Roll annealing furnace explanation video

Speak directly with facts on the spot。

Roll annealing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it has the functions of Casting heating, temper, quench, heat treatment and Forging heating。

Roll annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the main features are Easy to maintain, energy-efficient, Easy to maintain, energy saving and environmental protection and Stable and reliable。