What is a Annealing furnace chamber type? Introduction to the advantages and characteristics of the Forging furnace

Annealing furnace chamber typeIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，It is a product series that integrates Metal heat treatment, Metal tempering, Improve production efficiency, Metal melting and casting and Energy conservation and environmental protection，is an advanced Annealing furnace chamber type developed by our company in combination with the actual situation of the industry。The following is to introduce the Annealing furnace chamber type:

1、Brief introduction of Annealing furnace chamber type

Annealing furnace chamber typeIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

Annealing furnace chamber type

2、Annealing furnace chamber type field real shot

Speak directly with facts on the spot。

Annealing furnace chamber type

As you can see from the live video.，One-combustion energy saving the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

3、Annealing furnace chamber type advantage

Annealing furnace chamber types have the following advantages.

1. Rapid temperature rise

The Annealing furnace chamber type can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Efficient combustion

The Annealing furnace chamber type adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Intelligent control

The Annealing furnace chamber type is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Uniform heating

The Annealing furnace chamber type adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Extend the service life of equipment

The Annealing furnace chamber type adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Annealing furnace chamber type

4、Structural advantages of Annealing furnace chamber type

The Annealing furnace chamber type has the following structure

1. Radiation chamber

The heat load of the main place for Annealing furnace chamber type heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. Radiation chamber

The heat load of the main place for Annealing furnace chamber type heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Annealing furnace chamber type

5、Annealing furnace chamber type performance advantage

The advantages of Annealing furnace chamber type are as follows:

1. easy to operate

The operation interface of the Annealing furnace chamber type is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Efficient combustion

The Annealing furnace chamber type adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Wide application range

The Annealing furnace chamber type is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Improve product quality

Because the Annealing furnace chamber type can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Annealing furnace chamber type

6、Working principle of Annealing furnace chamber type

Annealing furnace chamber typeat work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，is a popular Annealing furnace chamber type，Commonly used inMetal forging heating,Metal forging heating,Metal tempering,Energy conservation and environmental protection,Metal heat treatment and so on，it is mainly composed of furnace chamber, combustor, Radiation chamber, convection chamber and ventilation system，has been favored by more and more customers.。

Annealing furnace chamber type

Annealing furnace chamber typeIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it is widely used inmachinery,petroleum,war industry,material,pharmacy and other industries。