Introduction to Well type ring annealing furnace and Forging furnace structure principle

Well type ring annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，It has a wide range of uses, including Energy conservation and environmental protection, Improve production efficiency, Metal tempering, Metal heat treatment and Metal forging heating，usually used in shipping, Machinery manufacturing, automobile, war industry, building materials and other fields，customizable。The following is to introduce the Well type ring annealing furnace:

1、Brief introduction of Well type ring annealing furnace

Well type ring annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，at the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it has the functions of heat treatment, Forging heating, Casting heating, normalizing and heat treatment，is based on One-combustion energy saving is a Well type ring annealing furnace newly developed by One-combustion energy saving。

Well type ring annealing furnace

2、Well type ring annealing furnace HD real picture

The following pictures can be used for reference by new and old customers.。

Well type ring annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Well type ring annealing furnace function

Well type ring annealing furnacemultifunctional, with functions such as Forging heating, temper, quench, hardening and tempering and anneal，is a common Well type ring annealing furnace，The structural design is more advanced and reasonable.，generally, it is composed of furnace chamber, furnace chamber, Radiation chamber, combustor, recovery of waste heat and other major components，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it is an ideal choice for customers to buy Well type ring annealing furnace。

Well type ring annealing furnace

4、Well type ring annealing furnace application

Well type ring annealing furnaces have the following purposes.

1. Energy conservation and environmental protection

The Well type ring annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal heat treatment

In addition to forging heating, Well type ring annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Well type ring annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The Well type ring annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal forging heating

The Well type ring annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Well type ring annealing furnace

5、How much is the Well type ring annealing furnace?

The Well type ring annealing furnace price is introduced as follows:

1. product configuration

The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. One-combustion energy saving has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.

2. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Well type ring annealing furnace price and service can meet the actual needs of customers.

3. Manufacturer's strength

Reliable manufacturers can produce excellent products, and such manufacturers have high comprehensive credibility and can design products in all directions. Therefore, compared with other manufacturers, such products have higher scientific and technological content and more functions. One-combustion energy saving's reputation and products are very high, and it is a trustworthy big brand and manufacturer.

4. regional advantages

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

5. product quality

The selling price of excellent quality products is also high, so users should also consider the quality and price of products comprehensively when purchasing products, so as to buy products with high cost performance.

Well type ring annealing furnace

6、One-combustion energy saving workshop real shot

On-site aerial photography of Well type ring annealing furnace。

Well type ring annealing furnace

As you can see from the live video.One-combustion energy saving it is mainly composed of ventilation system, ventilation system, convection chamber, furnace chamber and ventilation system，Well type ring annealing furnaceThe overall structural design is simple and novel.。

Well type ring annealing furnaceUniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，the product looks beautiful.，the main features are Stable and reliable, Strong adaptability, energy-efficient, energy saving and environmental protection and Stable and reliable。