Introduction to Square multi well heating furnace, forging furnace advantages, characteristics and principles

Square multi well heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，It is mostly used in Improve production efficiency, Metal forging heating, Metal heat treatment, Metal forging heating, Metal melting and casting, Energy conservation and environmental protection and so on，the product looks atmospheric.，it has the functions of anneal, anneal, normalizing, Forging heating and quench，is a popular Square multi well heating furnace。

1、Brief introduction of Square multi well heating furnace

Square multi well heating furnaceIt is a forging heating device using gas as fuel.，features include Easy to control, Easy to maintain, Strong adaptability, Easy to control and Easy to maintain，be loved by our customers.。

Square multi well heating furnace

2、Square multi well heating furnace structure composition

The Square multi well heating furnace has the following structure

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. Radiation chamber

The heat load of the main place for Square multi well heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Square multi well heating furnace

3、Square multi well heating furnace use

The purpose of Square multi well heating furnace is introduced as follows:

1. Metal forging heating

The Square multi well heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Square multi well heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal tempering

By properly heating and cooling the metal material, the Square multi well heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal heat treatment

In addition to forging heating, Square multi well heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Energy conservation and environmental protection

The Square multi well heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Square multi well heating furnace

4、Advantages of Square multi well heating furnace principle

Square multi well heating furnaceat runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

Square multi well heating furnace

5、Square multi well heating furnace advantage

The advantages of Square multi well heating furnace are as follows:

1. Uniform heating

The Square multi well heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. easy to operate

The operation interface of the Square multi well heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Extend the service life of equipment

The Square multi well heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Intelligent control

The Square multi well heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Multiple fuel options

Although the Square multi well heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

Square multi well heating furnace

6、Square multi well heating furnace display

One-combustion energy saving Square multi well heating furnace is completely upgraded, savoring the beauty of details.。

Square multi well heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Square multi well heating furnacethe advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，the principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。