Introduction to Full fiber multi well heating furnace, introduction to forging furnace function advantages and characteristics

Full fiber multi well heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

1、Brief introduction of Full fiber multi well heating furnace

Full fiber multi well heating furnaceIt is a forging heating device using gas as fuel.，is a common Full fiber multi well heating furnace，is based on One-combustion energy saving is an advanced Full fiber multi well heating furnace developed by our company in combination with the actual situation of the industry。

Full fiber multi well heating furnace

2、Full fiber multi well heating furnace application

Full fiber multi well heating furnaces have the following purposes.

1. Energy conservation and environmental protection

The Full fiber multi well heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Improve production efficiency

The Full fiber multi well heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal heat treatment

In addition to forging heating, Full fiber multi well heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Full fiber multi well heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal tempering

By properly heating and cooling the metal material, the Full fiber multi well heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Full fiber multi well heating furnace

3、Full fiber multi well heating furnace structure

The Full fiber multi well heating furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. Radiation chamber

The heat load of the main place for Full fiber multi well heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Full fiber multi well heating furnace

4、Full fiber multi well heating furnace application

Full fiber multi well heating furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Full fiber multi well heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Improve production efficiency

The Full fiber multi well heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Full fiber multi well heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal forging heating

The Full fiber multi well heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal tempering

By properly heating and cooling the metal material, the Full fiber multi well heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Full fiber multi well heating furnace

5、Functional advantages of Full fiber multi well heating furnace

Full fiber multi well heating furnaces have the following advantages.

1. Wide application range

The Full fiber multi well heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Rapid temperature rise

The Full fiber multi well heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

3. Improve product quality

Because the Full fiber multi well heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Wide application range

The Full fiber multi well heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Extend the service life of equipment

The Full fiber multi well heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Full fiber multi well heating furnace

6、Working principle of Full fiber multi well heating furnace

Full fiber multi well heating furnacethe principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it can be used in war industry, automobile, surface treatment, heat treatment, pharmacy and other industries，it has the characteristics of Easy to control, energy saving and environmental protection, Strong adaptability, Easy to control and Stable and reliable，customizable。

Full fiber multi well heating furnace

Full fiber multi well heating furnacethe product looks atmospheric.，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.。