Introduction to Full fiber deep well furnace and Forging furnace structure principle

Full fiber deep well furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Mainly used forMetal melting and casting,Improve production efficiency,Metal forging heating,Metal heat treatment andMetal tempering。The following is to introduce the Full fiber deep well furnace:

1、Brief introduction of Full fiber deep well furnace

Full fiber deep well furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，multifunctional, with functions such as anneal, heat treatment, temper, anneal and normalizing，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，it has the characteristics of energy saving and environmental protection, Strong adaptability, Easy to maintain, energy-efficient and Easy to control，at the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

Full fiber deep well furnace

2、Full fiber deep well furnace real shot picture

High-definition pictures of One-combustion energy saving Full fiber deep well furnace, showing different specifications and models.。

Full fiber deep well furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Full fiber deep well furnace principle

Full fiber deep well furnaceat runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Full fiber deep well furnace

4、Full fiber deep well furnace characteristics

The Full fiber deep well furnace features are as follows:

1. Easy to maintain

The structural design of the Full fiber deep well furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The Full fiber deep well furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Stable and reliable

The Full fiber deep well furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Full fiber deep well furnace

5、How much is the Full fiber deep well furnace?

The Full fiber deep well furnace price is introduced as follows:

1. Product configuration difference

Usually, the quotation of Full fiber deep well furnace changes with its configuration, but the quotation is different according to the different needs of customers and different product configurations.

2. raw material

The quality of material selection is one of the main factors that directly affect the Full fiber deep well furnace. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

3. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Full fiber deep well furnace price and service can meet the actual needs of customers.

4. Product technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Full fiber deep well furnace

6、One-combustion energy saving delivery site

On-site aerial photography of Full fiber deep well furnace。

Full fiber deep well furnace

As you can see from the live video.One-combustion energy saving It has a wide range of uses, and is often used inMetal forging heating,Improve production efficiency,Metal melting and casting,Energy conservation and environmental protection,Metal tempering and so on。

Full fiber deep well furnaceThe overall structural design is simple and novel.，it is mainly composed of recovery of waste heat, ventilation system, ventilation system, Radiation chamber and convection chamber，it has the functions of Casting heating, heat treatment, Forging heating, hardening and tempering and quench，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。