Introduction to Denitrification of forging heating furnace and SCR denitration system structure principle

Denitrification of forging heating furnacedelective catalytic reduction technology is an efficient flue gas denitrification technology.，it is mainly composed of Flue gas mixing and distribution system, control system, Temperature control and monitoring system, Catalyst reactor and Catalyst supply system，Denitrification of forging heating furnaceSimple structure and advanced technology.，Technology has been developed and applied for many years, and it is mature and stable. The Denitrification of forging heating furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Denitrification of forging heating furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Denitrification of forging heating furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Denitrification of forging heating furnace technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Denitrification of forging heating furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Denitrification of forging heating furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.，it is an ideal choice for customers to buy Denitrification of forging heating furnace。

1、Brief introduction of Denitrification of forging heating furnace

Denitrification of forging heating furnacethat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，Mainly used forenvironmental protection,Improve product quality,Improve product quality,environmental protection andPromote sustainable development，Stable operation,Less secondary pollution,energy saving and environmental protection,Good selectivity,Mature technology，it has the functions of environmental protection, Promote sustainable development, Improve working conditions, Improve energy efficiency and Promote sustainable development，widely used in Gas power plant, iron and steel plant, metallurgy, coal-fired power station, cement plant and other fields。

Denitrification of forging heating furnace

2、Denitrification of forging heating furnace application

Denitrification of forging heating furnaceWidely used in Meet the requirements of environmental protection, Flue gas denitrification, Improve product quality, environmental protection and Flue gas denitrification，in the course of work,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.。

Denitrification of forging heating furnace

3、Structural characteristics of Denitrification of forging heating furnace

The Denitrification of forging heating furnace has the following structure

1. control system

The whole Denitrification of forging heating furnace is automatically controlled to ensure the stable operation of the system and achieve the expected denitration effect.

2. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

3. Flue gas mixing and distribution

The mixed reducing agent and flue gas are fully mixed in the mixing tube and evenly distributed to the catalyst reactor through the distribution system.

4. Temperature control and monitoring

The temperature in the catalyst reactor is maintained within the optimal reaction temperature range through the temperature control and monitoring system.

5. control system

The whole Denitrification of forging heating furnace is automatically controlled, including the adjustment of reducing agent supply, flue gas flow and temperature, so as to ensure the stable operation of the system and achieve the expected denitrification effect.

Denitrification of forging heating furnace

4、Denitrification of forging heating furnace function

Denitrification of forging heating furnacemultifunctional, with functions such as environmental protection, Improve working conditions, environmental protection, Promote sustainable development and Improve energy efficiency，the full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.，the principle is simple.Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，the product looks atmospheric.，the advantage is Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Denitrification of forging heating furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、Technology has been developed and applied for many years, and it is mature and stable. The Denitrification of forging heating furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Denitrification of forging heating furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Denitrification of forging heating furnace technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Denitrification of forging heating furnace technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Denitrification of forging heating furnace technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Denitrification of forging heating furnace technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.。

Denitrification of forging heating furnace

5、How much is the Denitrification of forging heating furnace?

The Denitrification of forging heating furnace price is introduced as follows:

1. Product technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

2. specifications and models

The same equipment, even with different models and different configurations, has different investment costs, so the price will be different.

3. Brand strength

At present, there are various brands of Denitrification of forging heating furnace in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Denitrification of forging heating furnace are different.

4. Manufacturer's strength

Our factory has mature and perfect production technology, advanced and intelligent processing technology, abundant labor resources and low investment. Coupled with the influence of special geographical location, our company has invested much less in manpower, material resources and financial resources than other manufacturers.

5. regional advantages

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

Denitrification of forging heating furnace

6、One-combustion energy saving's after-sales service

Customers should not only consider quality, performance and price factors when purchasing Denitrification of forging heating furnace, but also consider the after-sales service of manufacturers. Good after-sales service can reduce many unnecessary troubles for customers. One-combustion energy saving Factory always adheres to the service attitude of "customer is God", implements high-standard and high-quality after-sales service attitude, conducts regular customer satisfaction surveys, and strictly supervises the quality of after-sales service, so as to relieve customers' purchasing concerns and make purchasing customers completely worry-free.。

One-combustion energy saving

Denitrification of forging heating furnaceat the start of the operation,Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，it has been widely used in Gas power plant, metallurgy, iron and steel plant, building materials, metallurgy and other industries。